With a dynamic UCS, create some more objects in the 3D model from the
last exercise.
1. Open the A3D_03_02.DWG file.
2. Turn on
DUCS.
3. Create some circles and rectangles on the front and left faces:
4. Create a square of side 1 on the upper inclined face from the lower-left
corner of the inner rectangle, 2 units along the horizontal and 1 unit along
the vertical. Apply the RECTANG command, pause over the face, press
Ctrl,
and right-click and select
From. Specify the lower-left corner of the inner
rectangle as the base point and type @2,1 for the offset distance. Then type
@1,1 as the opposite corner:
5. There is no need to save the model.