Visio Lab AssignmentPart 1.) Draw a network diagram a general home networkPart 2.) Draw a network diagram of the following: It has 200 workstations in a 3 floor building with 10 servers, 5 normal printers and 1 high speed printer. Each floor of the building is 150’ by 150’
Lab DetailsBegin by opening the program and select Networks from the list under Category. (What you see when you open Visio varies by version and your configuration).
You should see a series of overlapping “stencils” on the left side of your screen. Select Basic Networks. This should have most of the icons you’ll need to get started. Scroll down to the bottom of the stencil to find the connectors. You will need these to interconnect your devices. Try to get as much detail as possible, without making it appear cluttered. Put each drawing on a separate standard 8½” X 11” piece of paper. Investigate features available in Visio and include them as appropriate.
If for whatever reason you can not get Visio to properly download and install you need to hand draw them and scan them in to submit.
Part 3.) Draw a network diagram of a networking lab
Use the following information as you draw the networking lab.
The room is approximately 20 feet by 40 feet24 Dell workstationsHP printer ("A" network)Lexmark printer ("B" network)24 switchboxes(A/B network selector)2 switches2 windows 2016 servers("B" network)1 Linux server("B" network)"A" network"B" network1 Connection to Internet from Network B
Finally Explain how you would subnet this as a Class "C" Private network in to two separate networks using the IP 192.168.1.x
please submit this portion in a text document not on the visio document