This project will require an integrated development environment (IDE). Before attempting this assignment, it is recommended that you use one of the following IDEs: Visual Studio or Eclipse. Directions for accessing these IDEs can be found in the attached “IDE Instructions."
Your submission should include a zip file with all the necessary code files to compile, support, and run your application. The zip file submission must also keep the project file and folder structure intact for the Visual Studio IDE or Eclipse IDE.
I have attached the scenario
FPP1 — FPP1 TASK 1: CLASS ROSTER SCRIPTING AND PROGRAMMING APPLICATIONS — C867 PRFA — FPP1 COMPETENCIES 4048.2.1 : Introduction to Programming The graduate applies fundamental programming concepts in a specific programming environment. 4048.2.2 : Variables and Data Types The graduate prepares code which declares, initializes, and assigns values to variables of appropriate types as part of the application development process. 4048.2.3 : Control Structures The graduate writes code that implements decision and loop constructs to control the flow of a program. 4048.2.4 : Arrays The graduate creates arrays in order to solve complex problems. 4048.2.5 : Pointers and Memory The graduate applies pointers to solve complex problems. 4048.2.6 : Functions The graduate writes code that creates and manipulates functions and files. 4048.2.7 : Object-Oriented Paradigm The graduate applies object-oriented programming concepts in order to create a basic application. INTRODUCTION Throughout your career in software development, you will develop and maintain new and existing applications. You will be expected to fix issues as well as add new enhancements or migrate existing applications to new platforms or different programming languages. As a software developer, your role will be to create a design of an application based on given business requirements. After the design is completed, you must implement the application based on the design document and provided requirements. In this assessment, you will create a C++ application based on the scenario below. The skills you demonstrate in your completed application will be useful in responding to technical interview questions for future employment. This application may also be added to your portfolio to show to future employers. This project will require an integrated development environment (IDE). Before attempting this assignment, it is recommended that you use one of the following IDEs: Visual Studio or Eclipse. Directions for accessing these IDEs can be found in the attached “IDE Instructions." Your submission should include a zip file with all the necessary code files to compile, support, and run your application. The zip file submission must also keep the project file and folder structure intact for the Visual Studio IDE or Eclipse IDE. SCENARIO TASK OVERVIEW SUBMISSIONS EVALUATION REPORT You are hired as a contractor to help a university migrate an existing student system to a new platform using C++ language. Since the application already exists, its requirements exist as well, and they are outlined in the next section. You are responsible for implementing the part of the system based on these requirements. A list of data is provided as part of these requirements. This part of the system is responsible for reading and manipulating the provided data. You must write a program containing five classes (i.e., Student , SecurityStudent , NetworkStudent , SoftwareStudent , and Roster ). The program will maintain a current roster of students within a given course. Student data for the program includes student ID, first name, last name, email address, age, an array of the number of days to complete each course, and degree. This information can be found in the studentData table below. The program will read a list of five students and use function calls to manipulate data (see part F4 in the requirements below). While parsing the list of data, the program should create student objects using the appropriate subclasses indicated by the degree program. The entire student list will be stored in one array of students called classRosterArray Specific data-related output will be directed to the console. STUDENT DATA TABLE Student ID First Name Last Name Email Age Days in Course Degree A1 John Smith John1989@gm ail.com 20 30, 35, 40 SECURITY A2 Suzan Erickson Erickson_1990@gmailcom 19 50, 30, 40 NETWORK A3 Jack Napoli The_lawyer99yahoo.com 19 20, 40, 33 SOFTWARE A4 Erin Black
[email protected] 22 50, 58, 40 SECURITY A5 Your first name Your last name Your valid email address Your age Number of days to complete 3 courses SOFTWARE The data should be input as follows: const string studentData[] = {"A1,John,Smith,John1989@gm ail.com,20,30,35,40,SECURITY", "A2,Suzan,Erickson,Erickson_1990@gmailcom,19,50,30,40,NETWORK", "A3,Jack,Napoli,The_lawyer99yahoo.com,19,20,40,33,SOFTWARE", "A4,Erin,Black,
[email protected],22,50,58,40,SECURITY", "A5,[firstname],[lastname],[emailaddress],[age], [numberofdaystocomplete3courses],SOFTWARE" You may not include third party libraries. Your submission should include one zip file with all the necessary code files to compile, support, and run your application. You must also provide evidence of the program’s required functionality by taking a screen capture of the console run, saved as an image file or PDF. Note: This assessment requires you to submit pictures, graphics, and/or diagrams. Each file must be an attachment no larger than 30 MB in size. Diagrams must be original and may be hand-drawn or drawn using a graphics program. Do not use CAD programs because attachments will be too large. REQUIREMENTS Your submission must be your original work. No more than a combined total of 30% of the submission and no more than a 10% match to any one individual source can be directly quoted or closely paraphrased from sources, even if cited correctly. An originality report is provided when you submit your task that can be used as a guide. You must use the rubric to direct the creation of your submission because it provides detailed criteria that will be used to evaluate your work. Each requirement below may be evaluated by more than one rubric aspect. The rubric aspect titles may contain hyperlinks to relevant portions of the course. Create a program that converts the array of strings found in the studentData table to an array of student objects by doing the following: A. Modify the studentData table to include your personal information as the last item. B. Create a C++ project in your integrated development environment (IDE) with the following files: • degree.h • student.h and student.cpp • networkStudent.h and networkStudent.cpp • securityStudent.h and securityStudent.cpp • softwareStudent.h and softwareStudent.cpp • roster.h and roster.cpp Note: There must be a total of 11 source code files. C. Define an enumerated data type Degree for the degree programs containing the following data elements SECURITY, NETWORKING and SOFTWARE. Note: This information should be included in the degree.h file. D. For the Student class, do the following: 1. Create the base class Student in the files student.h and student.cpp, which includes each of the following variables: • student ID • first name • last name • email address • age • array of number of days to complete each course • degree types Note: Degree type should be populated in subclasses only. 2. Create each of the following functions in the Student class: a. an accessor (i.e., getter) for each instance variable from part D1 b. a mutator (i.e., setter) for each instance variable from part D1 Note: All access and changes to the instance variables of the Student class should be done through the accessor and mutator functions. c. constructor using all of the input parameters provided in the table d. virtual print() to print specific student data e. destructor f. virtual getDegreeProgram() Note: Leave the implementation of the getDegreeProgram() function empty. 3. Create the three following classes as subclasses of Student, using the files created in part B: • SecurityStudent • NetworkStudent • SoftwareStudent Each subclass should override the getDegreeProgram() function. Each subclass should have a data member to hold the enumerated type for the degree program using the types defined in part C. E. Create a Roster class (roster.cpp) by doing the following: 1. Create an array of pointers, classRosterArray, to hold the data provided in the studentData table. 2. Create a student object for each student in the data table by using the subclasses NetworkStudent, SecurityStudent, and SoftwareStudent, and populate classRosterArray. a. Apply pointer operations when parsing each set of data identified in the studentData table. b. Add each student object to classRosterArray. 3. Define the following functions: a. public void add(string studentID, string firstName, string lastName, string emailAddress, int age, int daysInCourse1, int daysInCourse2, int daysInCourse3, < degree="" program="">) that sets the instance variables from part D1 and updates the roster. b. public void remove(string studentID) that removes students from the roster by student ID. If the student ID does not exist, the function prints an error message indicating that the student was not found. c. public void printAll() that prints a complete tab-separated list of student data using accessor functions with the provided format: 1 [tab] First Name: John [tab] Last Name: Smith [tab] Age: 20 [tab]daysInCourse: {35, 40, 55} Degree Program: Security. The printAll() function should loop through all the students in classRosterArray and call the print() function for each student. d. public void printDaysInCourse(string studentID) that correctly prints a student’s average number of days in the three courses. The student is identified by the studentID parameter. e. public void printInvalidEmails() that verifies student email addresses and displays all invalid email addresses to the user Note: A valid email should include an at sign ('@') and period ('.') and should not include a space (' '). f. public void printByDegreeProgram(int degreeProgram) that prints out student information for a degree program specified by an enumerated type F. Demonstrate the program’s required functionality by adding a void main() function to roster.cpp, which will contain the required function calls to achieve the following results: 1. Print out to the screen, via your application, the course title, the programming language used, your student ID, and your name. 2. Create an instance of the Roster class called classRoster. 3. Add each student to classRoster. 4. Convert the following pseudo code to complete the rest of the main() function: classRoster.printAll(); classRoster.printInvalidEmails(); //loop through classRosterArray and for each element: classRoster.printAverageDaysInCourse(/*current_object's student id*/); classRoster.printByDegreeProgram(SOFTWARE); classRoster.remove("A3"); classRoster.remove("A3"); //expected: the above line should print a message saying such a student with this ID was not found. 5. Call the destructor to release the Roster memory. ;gfsergfh;,] File Restrictions File name may contain only letters, numbers, spaces, and these symbols: ! - _ . * ' ( ) File size limit: 200 MB File types allowed: doc, docx, rtf, xls, xlsx, ppt, pptx, odt, pdf, txt, qt, mov, mpg, avi, mp3, wav, mp4, wma, flv, asf, mpeg, wmv, m4v, svg, tif, tiff, jpeg, jpg, gif, png, zip, rar, tar, 7z RUBRIC A:PERSONAL INFORMATION