PROJ6003_Assessment 1 Brief_July 2018.Docx Page 1 of 9 ASSESSMENT BRIEF Subject Code and Title PROJ6003 Project Execution and Control Assessment Assessment 1: Change Management (2 parts) Part A:...

1 answer below »
this is a report of 1000 words, just the part B of the assessment


PROJ6003_Assessment 1 Brief_July 2018.Docx Page 1 of 9 ASSESSMENT BRIEF Subject Code and Title PROJ6003 Project Execution and Control Assessment Assessment 1: Change Management (2 parts) Part A: Module 1-2 Discussion Forum Part B: Change Control Individual/Group Part A: Individual Part B: Individual/Group Length Part A: 600 words Part B: 1000 words/student Learning Outcomes 1. Draw on tools and techniques of sourcing project data, develop a range of processes and measures to manage scope, change and quality on complex global projects. Submission Part A: Post by end of Module 2. Part B: By 11:55pm AEST/AEDT Sunday end of Module 3 Weighting 50% (Part A: 15%; Part B: 35%) Total Marks Part A: 15 marks Part B: 35 marks Context: During project execution, project managers ensure that project work is completed as specified in the Project Management Plan and according to project requirements. Requirements may change throughout the course of a project. Changes need to be controlled, ensuring all of their impacts upon the project are managed effectively and are incorporated into existing management plans and project baselines. The process of directing and managing project work requires project managers to take on numerous responsibilities and to exhibit characteristics such as attention to detail, constant communication and effective leadership. Instructions: For this Assessment refer to the assessment case study found in Key Learning Resources. PROJ6003_Assessment 1 Brief_July 2018.Docx Page 2 of 9 There are two parts for this assessment: 1 Discussion Forum (Part A) that prepares students to write a Change Management Plan (Part B). Each student will construct an initial response in approximately 350 words to the following questions and post on the Module discussion forums. Students will be graded individually on how students demonstrate/share project change management theories and contribute to the general discussion of the topic over weeks 2, 3 & 4 as well as their 250-words written response. The initial and responding posts must be submitted by the end of Module 2 (Total 600 words). Part A: Module 1-2 Discussion Forums Managing Project Changes Why is change management a necessary component of project management? What processes or strategies do you think would work best to analyse changes and perform a change request on the project in the given/approved case study? Recall any tools or techniques you have used to stay organised and keep professional projects on track. How have these tools and techniques helped you to manage changes? Perhaps you created schedules using software like ProjectLibre or Microsoft Project. Or, potentially, you created a task list using MS Word or an application on your mobile device. Maybe, you used an issue tracking software to monitor progress. Output: Part A – Complete your posts by the end of Module 2. Part B: Change Control Based upon the given/approved case study, in groups or as an individual, develop a report on change control. In the report: 1. Identify what processes are involved in submitting a request to deal with the changes necessary from your understanding of the case study. 2. Identify and critically analyse changes required and the impacts on scope, time, cost and quality of the project and the techniques used to manage them. 3. Identify and discuss options to satisfy each change request and any risks associated to the options. 4. Complete the change request/control form provided or one that is used from a workplace. The written part of your change control report should consist of 1000 words/student. If you work in group, nominate a group leader and this group leader will submit the assessment on behalf of the group. Output: Complete and submit your change control report by the end of Module 3. PROJ6003_Assessment 1 Brief_July 2018.Docx Page 3 of 9 Learning Resources: Heldman, K. (2013). PMP Project Management Professional Exam Study Guide (7th ed.). Indianapolis, IN: Wiley  Chapter 8: Developing the Project Team (Read the section on ‘Directing and Managing Project Work’)  Chapter 10: Measuring and Controlling Project Performance (Read the section on ‘Managing Perform Integrated Change Control’)  Chapter 11: Controlling Work Results (Read the sections from ‘Managing Cost Changes’ to and including ‘Validating Project Scope’) ProjectLibre. (n.d.). ProjectLibre: Open source replacement of Microsoft Project [Software download]. Retrieved from http://www.projectlibre.org/home Project Management Institute. (2013). A guide to the project management body of knowledge (PMBOK Guide®) (5th ed.). Newtown Square, Pennsylvania: Project Management Institute.  Section 3.5: Executing Process Group  Section 3.6: Monitoring and Controlling Process Group  Section 4.3: Direct and Manage Project Work  Section 4.4: Monitor and Control Project Work  Section 4.5: Perform Integrated Change Control  Section 5.5: Validate Scope  Section 5.6: Control Scope  Section 6.7: Control Schedule  Section 7.4: Control Costs  Section 11.6: Control Risks Snyder, C. S. (2013). A project manager’s book of forms: A companion to the PMBOK guide (2nd ed.). Indianapolis, IN: Wiley.  Change Log Template (Word document)  Change Management Plan Template (Word document)  Change Request Template (Word document) Wysocki, R. K. (2012). Effective Project Management: Traditional, Agile, Extreme (6th ed.). Indianapolis, IN: Wiley.  Chapter 6: How to Launch a TPM Project (sections ‘Recruiting the Project Team’ to ‘Assigning Resources’).  Chapter 7: How to Monitor and Control a TPM (Read the sections from ‘Managing Project Status Meetings’ to and including ‘Putting It All Together’). Assessment Criteria: Please refer to the following learning rubrics for assessment criteria on each part. http://www.projectlibre.org/home http://ezp.tua.edu.au/login?url=http://search.ebscohost.com/login.aspx?direct=true&AuthType=ip,url,uid&db=nlebk&AN=565869&site=eds-live&scope=site http://ezp.tua.edu.au/login?url=http://search.ebscohost.com/login.aspx?direct=true&AuthType=ip,url,uid&db=nlebk&AN=565869&site=eds-live&scope=site PROJ6003_assessment 1 brief_July 2018.docx Page 4 of 9 Learning Rubric – Assessment 1 Part A: Modules 1-2 Discussion Forums Assessment Attributes Fail (0-49) Pass (50-64) Credit (65-74) Distinction (75-84) High Distinction (85-100) Contributes to identifying tools or techniques of sourcing project data and developing processes and measures to manage project change 60% Fails to contribute to the identification of tools or techniques of sourcing data and/or developing processes and measures to manage project change. Contributes an identification of tools or techniques of sourcing project data. Resembles a recall or summary of key ideas. Contributes an identification of both tools and techniques of sourcing project data without citing evidence from the research or readings. Demonstrates capacity to explain and apply relevant concepts. Contributes an identification of both tools and techniques of sourcing project data and analyses or evaluates their value towards the processes to measure and manage project change. Supports personal opinion and information substantiated by evidence from the research/course materials. Contributes an identification of both tools and techniques of sourcing project data and analyses or evaluates their value towards the processes to measure and manage project change, with added insight that extends knowledge available from sourced data. Critically discriminates between assertion of personal opinion and information substantiated by robust evidence from the research/course materials Constructive feedback to peers 30% Fails to offer any feedback. No support or encouragement to peers. No awareness or sensitivity to diversity amongst peers. Offers feedback but rarely constructive or useful. Feedback is not always clear or specific to guide peers. Little support or encouragement to peers. Offers feedback that is sometimes constructive or useful. Feedback is provided with examples to guide peers. Some support and encouragement to peers. Offers constructive feedback regularly. Formulates the merits of alternative ideas or proposals and communicates them to peers. Always offers detailed constructive feedback that is specific and appropriate. Expertly articulates the merits of alternative ideas or proposals and communicates them effectively to peers. PROJ6003_assessment 1 brief_July 2018.docx Page 5 of 9 Demonstrates little awareness of and/or sensitivity to diversity amongst peers. Demonstrates some level of awareness of and sensitivity to diversity amongst peers. Offers support and encouragement to peers. Demonstrates a high level of awareness of and sensitivity to diversity amongst peers. Provides expert assistance, support, and encouragement to peers. Consistently demonstrates a high level of awareness of and sensitivity to diversity amongst peers. Use of academic and discipline conventions and sources of evidence 10% Poorly written with errors in spelling, grammar. Demonstrates inconsistent use of good quality, credible and relevant research sources to support and develop ideas. There are mistakes in using the APA style. Is written according to academic genre (e.g. with introduction, conclusion or summary) and has accurate spelling, grammar, sentence and paragraph construction. Demonstrates consistent use of credible and relevant research sources to support and develop ideas, but these are not always explicit or well developed. There are no mistakes in using the APA style. Is well-written and adheres to the academic genre (e.g. with introduction, conclusion or summary). Demonstrates consistent use of high quality, credible and relevant research sources to support and develop ideas. There are no mistakes in using the APA style. Is very
Answered Same DayApr 02, 2021PROJ 6003

Answer To: PROJ6003_Assessment 1 Brief_July 2018.Docx Page 1 of 9 ASSESSMENT BRIEF Subject Code and Title...

Malvika answered on Apr 04 2021
144 Votes
Part B
Processes involved in submitting a request to deal with the changes
During a project, one can come cross change requests as it is a reality in the business world. It happens because we live in an eve
r changing and competitive world where people need time to understand for realizing what they need which is not possible at the start of the project (Hornstein, 2015). Thus, as and when the needs and demands of the customer changes, the business company needs to make changes in their project.
Thus, the best way to manage the change would not be to avoid it but to deal with it efficiently. The case study is about Corwin Corporation who deal with the manufacturing of rubber and have maintained great reputation in this business. Their work is all about good quality but cheap rubber production.
The Corwin Corporation undertook a project from Peters company which was about a specialty-product. The Peters Company had a reputation of being difficult. but Corwin always kept them happy. In Dec 2002 Peters Company made an unusual request to conduct R&D for the development of a new rubber product. Corwin had only done this before once for Peters Company, but they were reluctant to do it again. When Peters offered them a five years contract for production of the new product.
Thus, a change was introduced in the Corwin Corporation which they needed to deal with. Also, all the VP (Marketing, Engineering and Manufacturing) discussed and managed to prepare a presentation for the Peters Company Project. The employees were told about the long-term benefits of the project so that they work enthusiastically for the same (Imran et al., 2016). The employees found it difficult to adjust in the beginning but then progressed rapidly.
Changes required, impacts on scope, time, cost and quality and the techniques
Firstly, the main change that Corwin made was accepting the R&D which they were not doing on a regular basis sand thus were unfamiliar with the difficulties that may arise. Then they chose a project manager who was not ready to be headed by a man from another...
SOLUTION.PDF

Answer To This Question Is Available To Download

Related Questions & Answers

More Questions »

Submit New Assignment

Copy and Paste Your Assignment Here