The stepped beam has heights h 1 = 0.5 m and h 2 = 0.167 m. It has width t = 50 mm and a fillet radius of 16.7 mm. The material being considered for the beam yields at 270 MPa. Would this choice...

The stepped beam has heights
h
₁
= 0.5 m and
h
₂
= 0.167 m. It has width
t
= 50 mm and a fillet radius of 16.7 mm. The material being considered for the beam yields at 270 MPa. Would this choice result in yielding of the material if the bending moment
M
= 30 kN‐m?