The Mayfree Appliance Company requires sheet metal for its appliances. The company can purchase long coils of sheet metal in two different widths: 65 inches and 40 inches. The company must purchase...

The Mayfree Appliance Company requires sheet metal for its appliances. The company can purchase long coils of sheet metal in two different widths: 65 inches and 40 inches. The company must purchase the coils by linear foot of length: $1.20 per foot for a 64-inch coil and $1.00 per foot for a 40-inch coil. (This implies that a square foot, say, of the wider coil is less expensive.) Up to 4000 feet of the 65-inch coil is available, and up to 6000 feet of the 40-inch coil is available. There are manufacturing requirements for six different widths: 50, 45, 40, 35, 20, and 10 inches. Mayfree’s requirements are expressed as lengths of the various widths. The company requires 1000 feet of 50-inch width, 2500 feet of 45-inch width, 3000 feet of 40-inch width, 2300 feet of 35-inch width, 1300 feet of 20-inch width, and 2000 feet of 10-inch width. Determine how much of each width coil Mayfree should purchase and how it should cut the coils into various widths to meet its requirements at minimal cost. (Hint: First, list all patterns that can be cut from a 65-inch coil, and do the same for a 40-inch coil. Then have a changing cell for each pattern that designates the number of linear feet to be cut in this pattern.)