the assessment has 10 task and is attached
Microsoft Word - CSE1SIXAss3Op1v02Jan2020 Assessment 3 Operating system report CSE1SIX Information System Infrastructure 2 © Didasko 2020. All rights reserved. 2 Objectives Set up a small office network, identify devices, network components & media type used Assigning IP addresses to devices connected in a LAN environment Identify issues and suggest solutions related to network or internet Copying, Plagiarism This is an individual assignment. Students are not permitted to work in a group when writing this assignment. Plagiarism is the submission of another person’s work in a manner that gives the impression that the work is their own. La Trobe University treats plagiarism seriously. When detected, penalties are strictly imposed. Further information can be found on http://www.latrobe.edu.au/students/academic- integrity/explanation/plagiarism Submission Guidelines Your assignment submission should be typed, not written/drawn by hand. Submit the electronic copy of your assignment through the subject LMS. Submission after the deadline will incur a penalty of 5% of the final assignment mark per day capped at 5 days. No assignment will be accepted after 5 days. If you have encountered difficulties that lead to late submission or no submission, you should apply for special consideration. © Didasko 2020. All rights reserved. 3 Scenario Mark & Horton tax accountants have opened a new office in Melbourne, Australia. They are committed to providing taxation and financial planning services to both individuals and small business owners. Currently they have four (4) full-time tax accountants, two (2) junior accountants and two (2) receptionists appointed to facilitate the clients. Additionally, two (2) financial advisors work two days a week. All the workstations being in workgroup environment have caused a few concerns for the company mainly: security retrieval of client information from individual staff computers and accessibility of information Assume that you have been hired to provide advice and help in the installation and configuration of an appropriate operating system that will satisfy the needs of the company. Perform the following tasks to support this. Task 1 You have already conducted your research, consulted with the client and made the decision that Windows Server 2016 will satisfy the needs of the company. You are to install Windows Server 2016 on Oracle Virtual Box and set the Administrator account password to Password1. You are to take screenshots of the entire installation process which needs to be saved into a document named xxx_cse1six_assessment3.docx (where xxx is your student ID). Task 2 You have already conducted your research and found that the company’s concerns can be overcome by installing Active Directory Domain Services (AD DS). List and explain at least four advantages of domain-based environment over workgroup environment. Make sure to paraphrase and provide referencing. Task 3 Research and note the minimum hardware and software requirements for installing Active Directory Domain Services (AD DS) and run msinfo32 command to identify your machine’s compatibility with AD DS. After you complete this, take a screenshot of system summary and save to the xxx_ cse1six_assessment3.docx document. 4 © Didasko 2020. All rights reserved. 4 Task 4 Install and configure Active Directory Domain Service (use installation options as detailed below) on your Windows Server 2016 based on the following: Computer Name: MHDC1 IP Address: 192.168.1.10 Subnet Mask: 255.255.255.0 Gateway: 192.168.1.1 Preferred DNS Server: 192.168.1.10 Firewall: Disable Domain Name: mh.com.au Take MHDC1 screenshots for the following: 1. Installation steps for active directory 2. TCP/IP configuration clearly showing IP Address, Subnet Mask, Gateway and Primary DNS. 3. System properties clearly showing computer name and Fully Qualified Domain Name (FQDN). Add the Task 4 screenshots to the xxx_cse1six_assessment3.docx document and resave. Task 5 In Windows Server 2016 log on with the Administrator account and use the Active Directory Administrative Centre or Active Directory Users and Groups to complete the following tasks: Create two groups: Accounts and Finance. Create and configure two user accounts for Tom Davies and Julie Mann as follows: o Set password as Password2 for both user accounts. o Set Password never expires option for both user accounts. o Set the SamAccountName for Tom Davies as mh\tdavies and add as a member of the Accounts group (as the primary group) and remove from the Domain Users group. o Set the SamAccountName for Julie Mann as mh\jmann and add as a member of the Finance group (as the Primary Group) and remove from the Domain Users group. After you complete the above account administration, you must provide the following screenshots as evidence of completion of this task: A screenshot for the Active Directory Administrative Centre interface which shows the two newly created groups and two user accounts. A screenshot for the properties of Tom Davies’ user account that: © Didasko 2020. All rights reserved. 5 1. Shows the username configuration 2. Shows the user account only belonging to the Accounts group. A screenshot for the properties of Julie Mann’s user account that: 1. Shows the username configuration 2. Shows the user account only belonging to the Finance group Add the Task 5 screenshots to the xxx_cse1six_assessment3.docx document and resave. Task 6 In Windows Server 2016 log on with the Administrator account and create a new folder called “Client Data” in “X” drive, and then create or save some text files to this folder. You must configure both the share and NTFS permissions to control access as follows: Share the X:\Client Data folder with the Accounts group on the network. All the users in the Accounts group should have all permissions to the shared folder. Share the X:\Client Data folder with the Finance group. All the users in the Finance group should be able to view and open files in the shared folder. No other groups or users should be allowed access (either over the network or locally). Provide screenshots for the above settings and add them to the xxx_cse1six_assessment3.docx document and resave, screenshot should include the following: 1. Client data folder created in X drive. 2. Level of permissions to the shared folder for each group (Accounts and Finance group). Task 7 You are to install Windows 10 on Oracle Virtual Box and set the local Administrator account password to Password1. Configure Windows 10 Host machine with the following configurations and join the mh.com.au domain. Computer Name: Staff1 IP Address: 192.168.1.11 Subnet Mask: 255.255.255.0 Gateway: 192.168.1.1 Primary DNS: 192.168.1.10 Firewall: Disable After completing the above configurations, you need to make sure that your Windows 10 Host machine can ping the Windows Server 2016 IP Address, Computer Name, Domain Name, and FQDN. Take Staff1 screenshots for the following: 6 © Didasko 2020. All rights reserved. 6 1. Windows 10 Host machine’s TCP/IP configuration clearly showing IP Address, Subnet Mask, Gateway and Primary DNS. 2. Ping output of the following 192.168.1.10 MHDC1 mh.com.au MHDC1.mh.com.au Staff1 has joined the mh.com.au domain. Add the Task 7 screenshots to the xxx_cse1six_assessment3.docx document and resave. Task 8 On Staff1 computer, log on using Tom Davies’ user account, map the shared Client Data folder as “Y” drive. You need to test the permission settings that you configured in Task 6 and provide the following as evidence: 1. Take a screenshot of the File Explorer interface to show the content of “Y” drive 2. Take screenshots of the creation of a new file, updating an existing file and deletion of new or existing files respectively. Add the Task 8 screenshots to the xxx_cse1six_assessment3.docx document and resave. Task 9 On Staff1 computer, log on using Julie Mann’s user account, map the shared Client Data folder as “Y” drive. You need to test the permission settings that you configured in Task 6 and provide the following as evidence: 1. Take a screenshot of the File Explorer interface to show the content of “Y” drive 2. Take screenshots of sub-folder creation, updating an existing file and deletion of existing file respectively. Add the Task 9 screenshots to the xxx_cse1six_assessment3.docx document and resave. Task 10 Explain: 1. Four main functions of an operating system and 2. The purpose of utility software such as “Task Manager”. When you have completed, submit the solutions to these tasks via the Upload link in CSE1SIX Assessment: Operating Systems Assignment on the Learning Portal. You should submit the following: © Didasko 2020. All rights reserved. 7 Submit your answers and screenshots to the relevant tasks in a single Word document called xxx_cse1six_assessment3.docx (where xxx is your student number) with clearly labelled headings for each task. 8 © Didasko 2020. All rights reserved. 8 Assessment 3 Marking Criteria 0 Point 5 Points 10 Points Task 1 Incorrect screenshots on Windows Server 2016 installation and Administration account password Partially correct answer Correct and complete screenshots provided as per the requirements Task 2 Incorrect listing of advantages Correctly listed, but inadequate or no explanation provided. Correctly listed & explained four advantages with proper referencing/citation Task 3 Incorrect screenshot Did not cover or partially covered minimum hardware and software requirements for installing Active Directory Domain Services (AD DS) Explained/covered minimum hardware and software requirements for installing Active Directory Domain Services (AD DS), Correct screenshot provided as per the requirements Task 4 Incorrect screenshots Partially correct answer Correct screenshots as per the requirement Task 5 Incorrect screenshots Partially correct answer Correct screenshots as per the requirements Task 6 Not attempted/all/most of the parts are incorrectly attempted. Answer is partially correct, separate partition is not created, AND/OR