Stream 1 containing an aqueous solution of compound A (MWA = 200) is mixed with stream 2 containing an aqueous solution of compound B (MW3 = 100) and fed to a reactor. Compound A reacts with compound...

Extracted text: Stream 1 containing an aqueous solution of compound A (MWA = 200) is mixed with stream 2 containing an aqueous solution of compound B (MW3 = 100) and fed to a reactor. Compound A reacts with compound B as shown in the block flow diagram shown below: Stream 1 Reactor Stream 3 Stream 4 Stream 2 A+2B D The concentrations and flow rates for these feed streams are given in the table below: Stream 1 Stream 2 Total molar flow 100 123 (mol/min) Specific Gravity 1.02 1.0 Concentration of A 3 (mol%) Concentration of B (mol%) 8.1 The conversion of A in the reactor is 78 %. You may assume the molar mass of water is 18. Determine the: e) concentration of B in stream 2 in mol B / liter of solution f) percent excess of component B g) extent of the reaction, &, in mol/min h) molar flow rate (mol/min) of component B in the reactor effluent (stream 4). i) molar percentage of component B in the stream 4 i) mass flow rate of component D in stream 4 (gm/min)