Spray drying is a process in which a liquid containing dissolved or suspended solids is injected into a chamber through a spray nozzle or centrifugal disk atomizer. The resulting mist is contacted...

Spray drying is a process in which a liquid containing dissolved or suspended solids is injected into a chamber through a spray nozzle or centrifugal disk atomizer. The resulting mist is contacted with hot air, which evaporates most or all of the liquid, leaving the dried solids to fall to a conveyor belt at the bottom of the chamber.Powdered milk is produced in a spray dryer 6 m in diameter by 6 m high. Air enters at 167°C and —40 cm H2O. The milk fed to the atomizer contains 70% water by mass, all of which evaporates. The outlet gas contains 12mole% water and leaves the chamber at 83°C and 1 atm (absolute) at a rate of 311 m3/min(a) Calculate the production rate of dried milk and the volumetric flow rate of the inlet air. Estimate the upward velocity of air (m/s) at the bottom of the dryer.(b) What problem would you guess would occur if the velocity is toohigh?