Since the bending safety stress Bem = 10 MPa and shear safety stress Bem = 600 kPa of the rectangular section beam given in the figure and whose width is b = 150 mm, the minimum height of the beam...

material mechanics

Extracted text: Since the bending safety stress Bem = 10 MPa and shear safety stress Bem = 600 kPa of the rectangular section beam given in the figure and whose width is b = 150 mm, the minimum height of the beam cross section should be so that the stresses that will occur on the beam do not exceed the safety stress values.


Extracted text: 6 kN/m h B b- 3 m 2 m