Question 2 A network administrator configures the interface Gi7 on R1 with the command ip address 178.18.28.234 255.255.255.0. However, when the administrator issues the command show ip route , the...

Extracted text: Question 2 A network administrator configures the interface Gi7 on R1 with the command ip address 178.18.28.234 255.255.255.0. However, when the administrator issues the command show ip route , the routing table does not show the directly connected network. What is the possible cause of the problem? a) The interface Gi7 has not been activated. b) No packets with a destination network of 178.18.28.0 have been sent to R1. c) The configuration needs to be saved first. d) The subnet mask is incorrect for the IPV4 address.


Extracted text: Question 3 2634:1:1/64 1-Ca10/01-( R1 )-[fab/10] --t 2634:12:1/64 1-- Ita0s6 -( R2 )-[Q10/0]-1 2634:2:/04 Write the appropriate command from R1 to set a recursive static route to the network 2634:2::/64 Note (1) Do not abbreviate the command (2 ) If required, use interface labels as in topology (3) All devices use their device ID as their host ID R1(config)# ipvó route 2634:2::/64 2634:12::2