Q6// Thin tube (20 mm inside diameter, 1 mm wall thickness and 100 mm long) is subjected to an internal pressure of 10 MPa as shown in Figure 1. If the uniaxial creep behaviour of the material is...

Extracted text: Q6// Thin tube (20 mm inside diameter, 1 mm wall thickness and 100 mm long) is subjected to an internal pressure of 10 MPa as shown in Figure 1. If the uniaxial creep behaviour of the material is described by Equation (1), determine the increase in the diameter and length of the cylinder after 10ʻh. (Neglect end effects). ɛ° =2.5x10-|6 gʻ,04 *........ (1) Figure 1