Q.1) Mark the following statements as true or false and correct the second part if false:1. The number (1.638125x235) expressed in IEEE 32-bit floating-point format as: XXXXXXXXXX101 XXXXXXXXXX2....

Q.1) Mark the following statements as true or false and correct the second part if false: 1. The number (1.638125x235) expressed in IEEE 32-bit floating-point format as: 10010011 10100010000000000000000 2. The header of the CD-ROM format contains the block address and the mode byte, in which:-Mode 0 and Mode 1 : Blank data Field, Mode 2: use of an ECC. 3. When X=1.000000000000000000000000x21 and Y=1.111111111111111111111111x20, The result of (Z=X-Y) will be Z=1x2-20 without guard bits and Z=1x2-22 when adding four guard bits. 4. The simple interrupt cycle of control unit actually consists of 3 steps and 3 micro-operations. 5. In the instruction cycle sequence, after each execute cycle is a fetch cycle. 6. The Wilkes control technique is a horizontal microprogramming format. 7. After implementation Booth`s algorithm for the operation (7 * 3) the contents of registers: A=0001 and Q= 0101. 8. Double side hard disk drives have: 8 platters, and 128 sectors per track. When the size of one sector 512 bytes, the size of one cylinder is 4 Kbytes. 9. After implementation the 2`s complement division for the operation (9/4) the contents of registers: A=0010 and Q= 0001. 10.The sequencing techniques categories of the microinstruction control unit are: branch taken, branch never taken.