Solve the following problem indicated below using the slope deflection equations. Show your complete-detail solution with accompanying Free-Body diagram. Box your only final answer, otherwise.
Extracted text: PROBLEM 2: A bolted connection shown is connected by 20 mm diameter bolts with an edge distance of 50 mm and the distance center to center of holes to be 75 mm. Assume that the deformation at bolt hole is a design consideration. The bolted connection is carrying an ultimate load Pu = 1500 kN, Fy = 248 MPa, Fu = 400 MPa and Fn = 415 MPa. Determine the following: (1) Design bearing strength of one bolt. (2) Design shear strength of one bolt. (3) The number of bolts are required for the connection show. P 12 mm plase P= I S00 kN P. 12 mm plate IS mn platr