ineed tosubmit by 3 sepPrepared by: Mr. Naveed Dilber Moderated by: Dr. Imran...

Question

ineed tosubmit by 3 sepPrepared by: Mr. Naveed Dilber                        Moderated by: Dr. Imran Jokhio, July, 2018        Assessment Details and Submission Guidelines  Unit Code BN321  Unit Title Advanced Network Design  Assessment Type Individual written report and demonstration   Assessment Title College Network Design   Purpose of the  assessment (with  ULO Mapping)  This assignment is designed to assess students’ knowledge and skills related to  the following learning outcomes:  b. Analyse network design requirements  c. Develop appropriate frameworks and standards for network implementation  Weight 15% of the total assessments  Total Marks 50  Word limit 1000 - 1500  Due Date 4th September, 2018 (23:55)  DD  Demo: Week-8 Laboratory session  Submission  Guidelines   All work must be submitted on Moodle by the due date along with a  completed Assignment Cover Page.    The assignment must be in MS Word format, 1.5 spacing, 11-pt Calibri (Body)  font and 2 cm margins on all four sides of your page with appropriate section  headings.     Reference sources must be cited in the text of the report, and listed  appropriately at the end in a reference list using IEEE referencing style.  Extension  If an extension of time to submit work is required, a Special Consideration  Application must be submitted directly to AMS. You must submit this  application three working days prior to the due date of the assignment.  Further information is available at:   http://www.mit.edu.au/about-mit/institute-publications/policies- procedures-and-guidelines/specialconsiderationdeferment   Academic  Misconduct       Academic Misconduct is a serious offence. Depending on the seriousness of  the case, penalties can vary from a written warning or zero marks to  exclusion from the course or rescinding the degree. Students should make  themselves familiar with the full policy and procedure available at:  http://www.mit.edu.au/about-mit/institute-publications/policies- procedures-and-guidelines/Plagiarism-Academic-Misconduct-Policy- Procedure. For further information, please refer to the Academic Integrity  Section in your Unit Description.            http://www.mit.edu.au/about http://www.mit.edu.au/about http://www.mit.edu.au/about-mit/institute-publications/policies-procedures-and-guidelines/special-considerationdeferment http://www.mit.edu.au/about-mit/institute-publications/policies-procedures-and-guidelines/special-considerationdeferment http://www.mit.edu.au/about-mit/institute-publications/policies-procedures-and-guidelines/special-considerationdeferment http://www.mit.edu.au/about-mit/institute-publications/policies-procedures-and-guidelines/special-considerationdeferment http://www.mit.edu.au/about-mit/institute-publications/policies-procedures-and-guidelines/special-considerationdeferment http://www.mit.edu.au/about-mit/institute-publications/policies-procedures-and-guidelines/special-considerationdeferment http://www.mit.edu.au/about-mit/institute-publications/policies-procedures-and-guidelines/special-considerationdeferment http://www.mit.edu.au/about-mit/institute-publications/policies-procedures-and-guidelines/special-considerationdeferment http://www.mit.edu.au/about-mit/institute-publications/policies-procedures-and-guidelines/special-considerationdeferment http://www.mit.edu.au/about-mit/institute-publications/policies-procedures-and-guidelines/special-considerationdeferment http://www.mit.edu.au/about-mit/institute-publications/policies-procedures-and-guidelines/special-considerationdeferment http://www.mit.edu.au/about-mit/institute-publications/policies-procedures-and-guidelines/special-considerationdeferment http://www.mit.edu.au/about-mit/institute-publications/policies-procedures-and-guidelines/Plagiarism-Academic-Misconduct-Policy-Procedure http://www.mit.edu.au/about-mit/institute-publications/policies-procedures-and-guidelines/Plagiarism-Academic-Misconduct-Policy-Procedure http://www.mit.edu.au/about-mit/institute-publications/policies-procedures-and-guidelines/Plagiarism-Academic-Misconduct-Policy-Procedure BN321  Advanced Network Design  Page 2 of 4  Prepared by: Mr. Naveed Dilber                           Moderated by: Dr. Imran Jokhio, July 2018 Assignment description  In this project you are required to design a network for an IT College that has recently leased a  building in Melbourne CBD with the aim of offering IT related courses to its students.   Upon initial planning, you have identified that there are 400 users in the college, 300 users in building  1 and 100 users in building 2. Every building has a spacious lobby for users which is 200 meters open  space where wireless access is required. Only authorized users should have the access to this wireless  network. Distance between these college buildings is 500 meters. A high speed internet connection  is required which needs to be shared among the users. Selection of appropriate standards and  technology for network implementation plays a vital role in this project.  Building 1 has four computer labs and building 2 has three computer labs. Each lab uses 35  computers. Each lab will also have a server in the closet located inside the lab. IP phones are located  in each lab to communicate to service desk. The IT Institute also wants to setup four classrooms, each  containing one computer which requires internet connectivity. Your task is to come up with a logical, efficient and scalable network design that will be suitable for  this institute. The institute has allowed an adequate budget to purchase any networking devices that  may be required, yet obviously does not want to spend more than necessary. In addition, industry- specific standards must be used and apply to IT infrastructure and services. Write a report and include:  1. Build a document giving all the necessary network designs (enough information should be  provided that will allow any technician to build your network structure from scratch).   2. Simple IP addressing solution (step by step workout of the calculations) that leaves room for  growth, is easy to administer and has the minimum wastage of available IP address space.  3. Write configurations of each networking device which are included in the network.  4. Configure two switches and two PCs on physical networking devices and demonstrate the  working model. Demonstration: Students should be ready with all setup and configurations before start of the  laboratory class. Tutor will ask 3-5 questions to each student to demonstrate any configuration of  the setup. Demonstration from each student should not be more than 5 minutes. BN321  Advanced Network Design  Page 3 of 4  Prepared by: Mr. Naveed Dilber                           Moderated by: Dr. Imran Jokhio, July 2018 In your report include the following contents  Project Scope   Detailed Network diagrams    Project hardware requirements  - Name of the network device with manufacturer’s name, series, model and ports  - Type of the cables used  - Name of the server, PC with specification such as operating system, RAM, hard disk  etc.   Network device configurations  - Include most of the suitable feature which you have studied from laboratories 1 to 6. Marking criteria:  Section to be included in the  report  Description of the section Marks  Project scope Outline of the report  3  Project hardware  requirements - Name of the network device with  manufacturer’s name, series, model and  ports  - Type of the cables  - Name of the server, PC with specification  such as operating system, RAM, hard disk etc.  7  Network Design Include a diagram of your designed network, and  write justifications of your design  10  Network device configurations  Configuration commands to configure network 10  Demonstration on physical  devices   Demonstration of configured network devices  during lab time  15  Reference style Follow IEEE reference style 5   Total 50       BN321  Advanced Network Design  Page 4 of 4  Prepared by: Mr. Naveed Dilber                           Moderated by: Dr. Imran Jokhio, July 2018 Marking Rubric Grade  Mark  HD  40-50  DI  35-39  CR  30-34  P  25-29  Fail

Prepared by: Mr. Naveed Dilber XXXXXXXXXXModerated by: Dr. Imran Jokhio, July, 2018 Assessment Details and Submission Guidelines Unit Code BN321 Unit Title Advanced Network Design Assessment Type...

Get Answer To This Question

Related Questions & Answers

Submit New Assignment