Please give the price of attached assignmentMicrosoft Word - BN106 T2 2018 Assignment-2 MEL...

Question

Please give the price of attached assignmentMicrosoft Word - BN106 T2 2018 Assignment-2 MEL SYD-v1.docx Prepared by: Dr Wanod Kumar       Moderated by: Dr SM Farhad July, 2018    Assessment Details and Submission Guidelines    Trimester 2, 2018  Unit Code BN106  Unit Title Networking Fundamentals  Assessment Type Individual Assessment   Assessment Title Assignment 2 – Network Design  Purpose of the  assessment (with  ULO Mapping)  This assignment assesses the basic concepts of networking design; students  should be able to demonstrate their achievements in the following unit  learning outcomes:  c. Recognize network topologies, media types and network components;  d. Identify the network (OSI) layers at which various network devices  operate;  e. Use some basic tools/utilities for network analysis;  f. Employ basic cabling and network design techniques to connect  devices.  Weight 15%  Total Marks 60  Word limit 1500  Due Date W   11:55 PM, Friday 28/09/2018  Submission  Guidelines   All work must be submitted on Moodle by the due date along with a  completed Assignment Cover Page.    The assignment must be in MS Word format, 1.5 spacing, 11-pt Calibri  (Body) font and 2.54 cm margins on all four sides of your page with  appropriate section headings.     Reference sources must be cited in the text of the report, and listed  appropriately at the end in a reference list using IEEE referencing style.  Extension If an extension of time to submit work is required, a Special Consideration  Application must be submitted directly on AMS. You must submit this  application three working days prior to the due date of the assignment. Further  information is available at:   http://www.mit.edu.au/about-mit/institute-publications/policies- procedures-and-guidelines/specialconsiderationdeferment   Academic  Misconduct      Academic Misconduct is a serious offence. Depending on the seriousness of the  case, penalties can vary from a written warning or zero marks to exclusion from  the course or rescinding the degree. Students should make themselves familiar  with the full policy and procedure available at:  http://www.mit.edu.au/about-mit/institute-publications/policies- procedures-and-guidelines/Plagiarism-Academic-Misconduct-Policy- Procedure. For further information, please refer to the Academic Integrity  Section in your Unit Description.       BN106 Networking Fundamentals Page 2 of 4    Prepared by: Dr Wanod Kumar       Moderated by: Dr SM Farhad July, 2018  Assignment Description  Global Solutions is a well renowned automobile parts manufacturing company. The  company’s head office is located in the city centre of Leeds, West Yorkshire. The head office  consists of three departments: general support, marketing, and sales. General support is  located on the first floor, while the marketing and the sales departments are located on  second and third floors of the building respectively. General support has 28 workstations,  marketing has 25 workstations, and sales has 40 workstations. Some applications require that  data be shared between departments, but generally, each department has its own  applications. Every workstation needs access to the Internet, the company internal Internet  (intranet), and e-mail. Suppose you are hired as the network engineer of the company to  design the network for head office.   The company is also planning to establish five offices in Halifax, Huddersfield, Wakefield,  Dewsbury, and Bradford. The area manager of the company has asked you to prepare a  networking solution that enables employees in all five offices to communicate both internally  in that office and, to a lesser extent, between the other offices and head office. The farthest  distance between any two offices is 50 kilometres. According to the specifications provided,  the most user resource requirements will be met by servers located in the same office as the  users who need to access them. The main communication requirements between offices  relate to e-mail and periodic file transfers.   You are required to design this network as a wired network.     The report should include following sections:    1. Introduction  2. The LAN network design of the head office  i. Discuss the locations of all workstations and interconnecting devices, such as  switches, and routers, if any to be used  ii. Discuss and justify the recommended media type  iii. Discuss the type of LAN topology and protocol to be used  iv. Discuss the connection that provides the Internet access to the LAN  v. The sketch of network plan for each floor (using some basic tools/utilities for  network design)  3. The WAN network design between all five offices and the head office  i. The sketch of the WAN connectivity (using some basic tools/utilities for  network design)  ii. Discuss the devices to be used such as routers (if any) and their functioning  iii. justify the recommended media type  iv. Discuss the type of network structure suitable in this scenario (circuit switched  or packet switched structure)  v. Discuss the recommended routing protocol in this scenario (RIP or OSPF)  4. A summary section  5. References in IEEE style      BN106 Networking Fundamentals Page 3 of 4    Prepared by: Dr Wanod Kumar       Moderated by: Dr SM Farhad July, 2018    Marking criteria:    Sections Description of the section Marks  Introduction Introduction about the report 5  LAN Network Design The LAN network design of the head office  i. Discuss the locations of all workstations and  interconnecting devices, such as switches,  and routers, if any to be used  ii. Discuss and justify the recommended media  type  iii. Discuss the type of LAN topology and  protocol to be used  iv. Discuss the connection that provides  Internet access to the LAN  v. The sketch of network plan for each floor  (using some basic tools/utilities for network  design)  25  WAN Network Design The WAN network design between all five offices  and head office  i. The sketch of the WAN connectivity (using  some basic tools/utilities for network  design)  ii. Discuss the devices to be used such as  routers (if any) and their functioning  iii. justify the recommended media type  iv. Discuss the type of network structure  suitable in this scenario (circuit switched or  packet switched structure)  v. Discuss the recommended routing protocol  in this scenario (RIP or OSPF)  15  Summary As summary section describing the contribution of  the report.  5  Report Layout The report layout should be appropriate (following  the submission guidelines and containing all the  sections mentioned above)  5  Reference style Follow IEEE reference style   Must consider at least five references from  conference/journal papers, and books.  5   Total 60         BN106 Networking Fundamentals Page 4 of 4    Prepared by: Dr Wanod Kumar       Moderated by: Dr SM Farhad July, 2018 Example Marking Rubric for Assignment #: Total Marks 60    Grade  Mark  HD  80% +  D  70%-79%  CR  60%-69%  P  50%-59%  Fail

Gaurav · Accepted Answer

Microsoft Word - BN106 T2 2018 Assignment-2 MEL SYD-v1.docx
	Assessment Details and Submission Guidelines
	Trimester
	2, 2018
	Unit Code
	BN106
	Unit Title
	Networking Fundamentals
	Assessment Type
	Individual Assessment
	Assessment Title
	Assignment 2 – Network Design
	Purpose of the assessment (with ULO Mapping)
	This assignment assesses the basic concepts of networking design; students should be able to demonstrate their achievements in the following unit learning outcomes:
c. Recognize network topologies, media types and network components;
d. Identify the network (OSI) layers at which various network devices operate;
e. Use some basic tools/utilities for network analysis;
f. Employ basic cabling and network design techniques to connect devices.
	Weight
	15%
	Total Marks
	60
	Word limit
	1500
	Due Date
	11:55 PM, Friday 28/09/2018
	Submission Guidelines
	· All work must be submitted on Moodle by the due date along with a completed Assignment Cover Page.
· The assignment must be in MS Word format, 1.5 spacing, 11-pt Calibri (Body) font and 2.54 cm margins on  all four sides of your page with appropriate section headings.
· Reference sources must be cited in the text of the report, and listed appropriately at the end in a reference list using IEEE referencing style.
	Extension
	If an extension of time to submit work is required, a Special Consideration Application must be submitted directly on AMS. You must submit this application three working days prior to the due date of the assignment. Further information is available at:
http://www.mit.edu.au/about-mit/institute-publications/policies- procedures-and-guidelines/specialconsiderationdeferment
	Academic Misconduct
	Academic Misconduct is a serious offence. Depending on the seriousness of the case, penalties can vary from a written warning or zero marks to exclusion from the course or rescinding the degree. Students should make themselves familiar with	the	full	policy	and	procedure	available	at: http://www.mit.edu.au/about-mit/institute-publications/policies- procedures-and-guidelines/Plagiarism-Academic-Misconduct-Policy- Procedure. For further information, please refer to the Academic Integrity Section in your Unit Description.
 (
Pr
e
pared
 
by:
 
Dr
 
Wa
n
od
 
K
u
m
ar
) (
Moderated
 
b
y
:
 
Dr
 
SM
 
F
a
rh
a
d
) (
J
u
ly,
 
2018
)
Assignment Description
Global Solutions is a well renowned automobile parts manufacturing company. The company’s head office is located in the city centre of Leeds, West Yorkshire. The head office consists of three departments: general support, marketing, and sales. General support  is located on the first floor, while the marketing and the sales departments are located on second and third floors of the building respectively. General support has 28 workstations, marketing has 25 workstations, and sales has 40 workstations. Some applications require that data be  shared between  departments, but  generally, each department has  its own applications. Every workstation needs access to the Internet, the company internal Internet (intranet), and e-mail. Suppose you are hired as the network engineer of the company to design the network for head office.
The company is also planning to establish five offices in Halifax, Huddersfield, Wakefield, Dewsbury, and Bradford. The area manager of the company has asked you to prepare a networking solution that enables employees in all five offices to communicate both internally in that office and, to a lesser extent, between the other offices and head office. The farthest distance between any two offices is 50 kilometres.

Microsoft Word - BN106 T2 2018 Assignment-2 MEL SYD-v1.docx Prepared by: Dr Wanod Kumar Moderated by: Dr SM Farhad July, 2018 Assessment Details and Submission Guidelines Trimester 2, 2018 Unit Code...

Answer To: Microsoft Word - BN106 T2 2018 Assignment-2 MEL SYD-v1.docx Prepared by: Dr Wanod Kumar Moderated...

Answer To This Question Is Available To Download

Related Questions & Answers

Submit New Assignment