Bn208 assi2Microsoft Word - BN208 Assignment 2 T2 2021 v1.0.docx BN208 Networked Applications ...

Question

Bn208 assi2Microsoft Word - BN208 Assignment 2 T2 2021 v1.0.docx BN208	 Networked	Applications	 	 Prepared	by:	Dr	Sanjeeb	Shrestha													Moderated	by:	Dr	Nazmus	Nafi	 September	2021	 	 	 	 	 	 	 	 	 	 	 	 	 	 	 	 	 	 	 	 	 	 	 	 	 	 	 	 	 Assessment	Details	and	Submission	Guidelines	 Trimester	 T2	2021	 Unit	Code	 BN208	 Unit	Title	 Networked	Applications	 Assessment	Type	 Group	Assignment	(3	-	4	students	in	each	group)	 Assessment	Title	 Network	Performance	Analysis	(Assignment	2)	 Purpose	of	the	 assessment	(with	 ULO	Mapping)	 This	assignment	assesses	the	following	Unit	Learning	Outcomes;	students	should	be	 able	to	demonstrate	their	achievements	in	them.	 a) Explain	various	technologies	and	standards	for	networked	application	 management;	 b) Apply	socio-technical	contexts	in	modern	network	applications	and	 management;	 d) Discuss	performance	and	deployment	issues	for	networked	applications;	 e) Utilize	appropriate	industry	tools	and	techniques	to	manage	networked	 applications	 Weight	 30%	 Total	Marks	 50	 Word	limit	 1500	–	2000	 Due	date	 	Week	11,	3	October	2021,	11:59	PM.	 Submission	 Guidelines	 • All	work	must	be	submitted	on	Moodle	by	the	due	date	along	with	a	completed	 Assessment	Cover	Page.	The	assessment	must	be	in	MS	Word	format,	1.15	 spacing,	12-pt	Calibri	(Body)	font	and	normal	margins	on	all	four	sides	of	your	 page	with	appropriate	section	headings.	Reference	sources	must	be	cited	in	the	 text	of	the	report,	and	listed	appropriately	at	the	end	in	a	reference	list	using	IEEE	 referencing	style.	The	report	should	be	in	MS	word	format	submitted	on	Moodle	 on	time.	 Extension	 If	an	extension	of	time	to	submit	work	is	required,	a	Special	Consideration	Application	 must	be	submitted	directly	to	the	School's	Administration	Officer,	in	Melbourne	on	 Level	6	or	in	Sydney	on	Level	7.	You	must	submit	this	application	three	working	days	 prior	to	the	due	date	of	the	assessment.	Applying	through	AMS	 https://online.mit.edu.au	 Academic	 Misconduct	 Academic	Misconduct	is	a	serious	offence.	Depending	on	the	seriousness	of	the	case,	 penalties	can	vary	from	a	written	warning	or	zero	marks	to	exclusion	from	the	course	 or	rescinding	the	degree.	Students	should	make	themselves	familiar	with	the	full	 policy	and	procedure	available	at:	https://www.mit.edu.au/about-mit/institute- publications/policies-procedures-and	 guidelines/AcademicIntegrityPolicyAndProcedure.	 BN208	 Networked	Applications	 	 Prepared	by:	Dr	Sanjeeb	Shrestha													Moderated	by:	Dr	Nazmus	Nafi	 September	2021	 Assignment	2	Description	 	 Overview	and	General	Instructions	of	Assignment	 	 Students	need	to	form	a	group	of	3	-	4	students	as	it	is	a	group	assignment.	In	the	report,	students	need	 to	focus	on	the	tasks	and	prepare	their	responses	as	per	the	marking	guide.	The	IEEE	style	referencing	 needs	to	be	followed.	 	 This	assignment	consists	of	three	parts,	Task	1	Task	2	and	Task	3.	 	 Task	1	 	 	 	 	 	 	 	 	 	 (8	Marks)	 Discuss	your	own	use	case/example	to	illustrate	any	two	of	the	Socio-Technical	Design	concept.	You	 may	use	the	following	points	for	your	illustration.	 1. Social	System	 2. Technical	System	 3. Integration	 4. Managing	the	System	 	 Task	2	 	 	 	 	 	 	 	 	 	 (24	Marks)	 	 	 	 	 	 	 		 SNMP	 is	 considered	 as	 a	 de-facto	 protocol	 for	 network	 management.	 Several	 versions	 of	 the	 protocol	exist	and	students	are	required	to	configure	SNMPv3	using	MIB	browser	in	packet	tracer.	 	 The	following	criteria	needs	to	be	satisfied.	 1. A	network	topology	consisting	of	at	least	5	routers	and	5	switches	need	to	be	built.	One	of	the	 host/computer	needs	to	be	designated	as	the	SNMP	manager.	 2. A	routing	protocol	of	your	choice	 (for	example	RIP	version	2,	OSPF,	EIGRP	etc.)	needs	 to	be	 configured	for	internetwork	connectivity.	Use	the	IP	addresses	of	your	choice.	 3. Configure	SNMP	v3	on	the	routers	with	community	privileges.	 4. Perform	the	following	tasks	on	the	host	manager	using	MIB	browser	and	verify	the	same	with	 the	CLI	of	the	device.		 a. Change	the	hostname	of	one	of	the	router	with	your	MITID.	 b. View	 the	 (administrative	 and	operational)	 status	 of	 the	 interfaces	 of	 the	one	of	 the	 routers		 c. View	the	routing	table	of	the	two	of	the	routers	 d. Show	that	SNMPv3	uses	UDP	for	communication	 e. Conclude	the	overall	working	of	SNMP.	 5. Screenshot	needs	be	included	as	a	proof	of	your	work.	 Hint:	You	could	use	the	following	link	as	a	reference	for	SNMP	configuration.		 https://www.youtube.com/watch?v=5h0fN0j2XS8	 	 		 BN208	 Networked	Applications	 	 Prepared	by:	Dr	Sanjeeb	Shrestha													Moderated	by:	Dr	Nazmus	Nafi	 September	2021	 Task	-	3	 	 	 	 	 	 	 	 	 (15	Marks)	 	 Wireshark	captures	data	from	live	network	traffic.	Investigate	streaming	audio	delivery	over	TCP	by	listening	to	 Internet	live	radio	and	capturing	the	transmitted	packets.	From	a	second	network	(Home,	work,	etc.),	students	 have	to	chase	and	capture	one	more	website	which	has	an	audio	stream	(such	as	radio	stations,	e.g.	 https://radio.abc.net.au/stations/news/live	).	 Listen	to	the	audio	stream	for	at	least	some	minutes	to	capture	enough	packets	for	analysis.	 	 	 All	captures	using	Wireshark	that	must	include	the	following	for	each	group:	 	 a) Start	date-time	of	capture	 b) Total	number	of	captured	packets	for	each	protocol	 c) Total	Number	of	lost	packets	 d) IP	addresses	of	the	client	and	server	 e) Show	your	performance	analysis	using	Throughput	Graph	and	Time	Sequences	Graph.	Screenshots	of	 the	graphs	need	to	be	provided	and	the	performance	shown	in	the	graph	must	be	discussed	in	detail	 by	each	group. BN208	 Networked	Applications	 	 Prepared	by:	Dr	Sanjeeb	Shrestha													Moderated	by:	Dr	Nazmus	Nafi	 September	2021	 Marking	Criteria/Report	Structure:	 	 Report	must	have	3	sections;	each	section	title	is	discussed	in	the	table	below:	 	 	 Section	to	be	included	 in	the	report	 Description	of	the	section	 Marks	 	 Task	1	 Students	should	illustrate	the	following	 principles	of	Socio-Technical	Design	while	 illustrating	your	selected	example/case-study.	 1. Social	System	 2. Technical	System	 3. Integration	 4. Managing	the	System	 	 8	 	 Task	2	 The	following	criteria	needs	to	be	satisfied.	 1. A	network	topology	consisting	of	 at	 least	3	 routers	and	3	switches	 need	 to	 be	 built.	 One	 of	 the	 host/computer	 needs	 to	 be	 designated	as	the	SNMP	manager.	 2. One	of	the	routing	protocols	 (for	 example	 RIP	 version	 2,	 OSPF,	 EIGRP	 etc.)	 needs	 to	 be	 configured	 for	 internetwork	 connectivity.	Use	the	IP	addresses	 of	your	choice.	 3. Configure	SNMP	v3	on	the	routers	 with	community	privileges	 4. Perform	the	following	task	on	the	 host	manager	using	MIB	browser	 and	verify	 the	 same	with	 the	CLI	 of	the	device.		 a. Change	 the	 hostname	 of	 one	 of	 the	 router	 with	 your	MITID.	 b. View	 the	 (administrative	 and	operational)	status	of	 the	 interfaces	of	 the	one	 of	the	routers		 c. View	the	routing	table	of	 the	one	of	the	routers	 d. Show	 that	 SNMPv3	 uses	 UDP	for	communication	 	 24	 	 	 	 	 	 BN208	 Networked	Applications	 	 Prepared	by:	Dr	Sanjeeb	Shrestha													Moderated	by:	Dr	Nazmus	Nafi	 September	2021	 e. Conclude	 the	 overall	 working	of	SNMP.	 5. Screenshot	needs	be	included	as	a	 proof	of	your	work.	 	 	 Task	3	 All	captures	using	Wireshark	that	must	include:	 a) Start	date-time	of	capture	 b) Total	 number	 of	 captured	 packets	 for	 each	protocol	 c) Total	Number	of	lost	packets	 d) IP	addresses	of	the	client	and	server	 e) Show	 your	 performance	 analysis	 using	 Throughput	Graph	and	Time	Sequences	 Graph.	 Screenshots	 of	 the	 graphs	 need	 to	 be	 provided	 and	 the	 performance	 shown	in	the	graph	must	be	discussed	in	 detail	by	each	group.		 	 	 	 15	 	 Reference	style	 	 Follow	IEEE	reference	style	 	 3	 	 Total	 	 50	 	 	 	 	 	 	 	 	 	 	 	 	 	 BN208	 Networked	Applications	 	 Prepared	by:	Dr	Sanjeeb	Shrestha													Moderated	by:	Dr	Nazmus	Nafi	 September	2021	 Marking	Rubric	for	Assignment	2:	Total	Marks	50	 	 	 	 	 	 Grade	 Mark	 HD	40-50	 DI	35-39	 CR	30-34	 P	25-29	 Fail

Neha · Accepted Answer

1. 
		Hostname
Router0	R0
Router4	R1
Router1	R2
Router3	R3
Router2	R4
Setting up IP addresses for PCs:
Setting up interfaces on routers:
2. Configuring routing:
3. Configuring SNMP:
4. 
(a)  
(b)  
(c)  
(d) show snmp host command will show that UDP is used by SNMP.

Microsoft Word - BN208 Assignment 2 T2 2021 v1.0.docx BN208 NetworkedApplications Preparedby:DrSanjeebShrestha Moderatedby:DrNazmusNafi September2021...

Answer To: Microsoft Word - BN208 Assignment 2 T2 2021 v1.0.docx BN208 NetworkedApplications...

Answer To This Question Is Available To Download

Related Questions & Answers

Submit New Assignment