.Microsoft Word - BN202 T1 2021 Assessment-1 MEL_SYD V1.2 Prepared by: Dr Sadia Aziz ...

Question

.Microsoft Word - BN202 T1 2021 Assessment-1 MEL_SYD V1.2   Prepared by: Dr Sadia Aziz          Moderated by: Dr Sihui (Sue) Zhou March, 2021    Assessment Details and Submission Guidelines  Trimester T1,  2021  Unit Code BN202  Unit Title Internetworking Technologies  Assessment  Type  Type A: Individual submission and demonstration  Assessment  Title  Assignment 1 - Network requirement analysis and plan  Purpose of the  assessment  (with ULO  Mapping)  Main objective of this assignment is to enable student to understand networking  devices, gather requirements for a given business case study and plan a network  design.  After successful completion of this assignment, students should be able to:    b) Explain human factors in achieving business and technical goals through  planning and design.    c) Develop architectural internetworking design for the business and  application domains.  Weight Part A: 5% and Part B: 10%  Total Marks 70  Word limit NA  Due Date  Part A Due Date 11:55PM 11th  April, 2021 (Week 3)  Part B Due Date 11:55 PM 9th  May, 2021 (Week 7)  Submission  Guidelines   Assignment1 being formative assessment is divided into two parts. The first part of  assignment 1 focuses on the basic network design concepts that is marked for 5%  of the total marks and the second part is an extension of first part with detailed  Network design, the remaining 10% of the total marks. Students have to submit the  first part by the end of week 3.  Assignment 1B would be submitted in week 7.      All work must be submitted on Moodle by the due date along with a  completed Assignment Cover Page.    The assignment must be in MS Word format, 1.5 spacing, 11-pt Calibri (Body)  font and 2 cm margins on all four sides of your page with appropriate section  headings.     Reference sources must be cited in the text of the report, and listed  appropriately at the end in a reference list using IEEE referencing style.  Extension  If an extension of time to submit work is required, a Special Consideration  Application must be submitted directly on AMS.  You must submit this  application three working days prior to the due date of the assignment.  Further information is available at:   http://www.mit.edu.au/about-mit/institute-publications/policies- procedures-and-guidelines/specialconsiderationdeferment   Academic  Misconduct       Academic Misconduct is a serious offence. Depending on the seriousness of  the case, penalties can vary from a written warning or zero marks to exclusion  from the course or rescinding the degree. Students should make themselves  familiar with the full policy and procedure available at:  http://www.mit.edu.au/about-mit/institute-publications/policies- BN202   Internetworking Technologies   Page#2 of 4    Prepared by: Dr Sadia Aziz          Moderated by: Dr Sihui (Sue) Zhou March, 2021  procedures-and-guidelines/Plagiarism-Academic-Misconduct-Policy- Procedure. For further information, please refer to the Academic Integrity  Section in your Unit Description.       Assignment 1 Description    Business case study: Network design proposal for a real estate company    Description    A small, independent, insurance company “Count On Us” has decided to purchase computers and  install an office network so they can begin filing tax returns electronically.  Up to now, they have been  completely computer-less, but they know times are changing and they need to use technology to  remain competitive.    This company has four (4) different departments (Admin, Finance, Security, and Managers) in Sydney.  The company wants to expand its branch office to Queensland with the same office setup as in  Sydney. Its Sydney office sits on approximately four acres of land and serves over 100 staff and 20  guest users. The office consist of two buildings. One building is used for admin and finance and other  building has Security and Managers. Each building has two floors with each department on each floor  Client is also requesting wireless internet access at all buildings.  The company needs a comprehensive, technologically advanced Network solution that is cost  effective and allow for network monitoring for this main office. The solution had to be easy to deploy  and manage due to limited staff.  Write a report with the following contents   Executive Summary   Goals   Priorities   List five questions you wish to ask the general manager on the first meeting with the  general manager.   Network Topology   Project hardware requirements (only for main office) with estimated budget.  o Name of the network device with manufacturer’s name, series, model and ports  o Network topology   o Type of the cables  o Name of the server, PC with specification such as operating system, RAM, hard disk  etc.   Network Design in Cisco Packet Tracer   Network device configurations  Router configuration  BN202   Internetworking Technologies   Page#3 of 4    Prepared by: Dr Sadia Aziz          Moderated by: Dr Sihui (Sue) Zhou March, 2021  o set hostname as your family name  o display the name of the file and version of IOS  o display the name of the interfaces  o display 6 IOS modes  o set system clock to 20th December 2020 4:45pm  o Set encrypted password for console access  o Configure the password for telnet access  o Demonstrate connectivity between different departments    Marking criteria:  Submission One (Part A) – 5%:  Section to be included in  the report  Description of the section Marks  Project Scope Outline the report  List five questions to ask from GM  3    5  Abstract Network  Design  Create a topology of the Network with all headings  and justifications  6  Project hardware  requirements  a. Name of the network device with  manufacturer’s name, series, model and ports  b. Type of the cables  c. Name of the server, PC with specification such  as operating system, RAM, hard disk etc.  6      Submission Two (The Final Report – Part B) – 10%:  Section to be included in  the report  Description of the section Marks  Project Scope   Goals  Priorities  Update your first submission by the lecturer’s  feedbacks from your submission one and add goals  and priorities of the client  6  Project hardware  requirements  Update your first submission by the lecturer’s  feedbacks from your submission one  a. Name of the network device with  manufacturer’s name, series, model and ports  b. Type of the cables  c. Name of the server, PC with specification such  as operating system, RAM, hard disk etc.  3+2+2  Network Design  Use Cisco packet Tracer to generate network  diagram.   (The design in cisco packet tracer must be  10  BN202   Internetworking Technologies   Page#4 of 4    Prepared by: Dr Sadia Aziz          Moderated by: Dr Sihui (Sue) Zhou March, 2021  created using the feedback on the topology)  Network device  configurations -  Router configuration  a. set hostname as your family name  b. display the name of the file and version of IOS  c. display the name of the interfaces  d. display 6 IOS modes  e. set system clock to 20th August 2020 4:45pm  f. Set encrypted password for console access  g. Configure the password for telnet access  h. Demonstrate connectivity between different  departments  16  Demonstration  Demonstrate switch and router configuration in  week 7 laboratory class  8  Part A&B  Reference style   Follow IEEE reference style   Part A=2    Part B=3   Total 50       BN202   Internetworking Technologies   Page#5 of 4    Prepared by: Dr Sadia Aziz          Moderated by: Dr Sihui (Sue) Zhou March, 2021 Marking Rubric for Assignment #1: Total Marks 70    Grade  Mark  HD  55-70  DI  45-54  CR  30-44  P  25-29  Fail

Microsoft Word - BN202 T1 2021 Assessment-1 MEL_SYD V1.2 Prepared by: Dr Sadia Aziz XXXXXXXXXXModerated by: Dr Sihui (Sue) Zhou March, 2021 Assessment Details and Submission Guidelines Trimester T1,...

Get Answer To This Question

Related Questions & Answers

Submit New Assignment