Lab Topology 10.1.2.10 10.0.1.10 PC3 PC1 SW1 SW3 FEO/1 10.1.2.1/24 FEO/1 10.0.1.1/24 10.1.1.0/24 10.1.0.0/24 10.0.0.0/24 R3 R2 R1 .1 .1 .2 .1 .2 .2 R4 FEO/0 FE0/o FEO/1 FEO/1 FEO/O FEO/O FE1/1...

Hello, I need to do this task on Cisco Packet Tracer, and i need the file.

Thank you!

Extracted text: Lab Topology 10.1.2.10 10.0.1.10 PC3 PC1 SW1 SW3 FEO/1 10.1.2.1/24 FEO/1 10.0.1.1/24 10.1.1.0/24 10.1.0.0/24 10.0.0.0/24 R3 R2 R1 .1 .1 .2 .1 .2 .2 R4 FEO/0 FE0/o FEO/1 FEO/1 FEO/O FEO/O FE1/1 203.0.113.1/24 FE1/0 10.1.3.1/24 FE1/1 10.0.3.1/24 FE1/0 10.0.2.1/24 SW4 SW2 R5 203.0.113.2/24 FEO/0 10.1.3.2/24 FEO/1 10.0.3.2/24 Interhet PC2 10.0.2.10


Extracted text: 1. Configure hostnames on the routers according to the Lab Topology diagram. 2. Configure IP addresses on R1 according to the Lab Topology diagram 3. Verify routes have been automatically added for the connected and local networks 4. Do you see routes for all networks that R1 is directly connected to? Why or why not? 5. Should you be able to ping from PC1 to PC2? Verify this. 6. Verify the traffic path from PC1 to PC2. Use the 'tracert' command. 7. Should you be able to ping from PC1 to PC3? Verify this. 8. Configure IP addresses on R2, R3 and R4 according to the Lab Topology diagram. Do not configure the Internet FastEthernet 1/1 interface on R4. Do not configure R5. 9. Verify PC3 can ping its default gateway at 10.1.2.1 10. Configure static routes on R1, R2, R3 and R4 to allow connectivity between all their subnets. Use /24 prefixes for each network. 11. Verify connectivity between PC1, PC2 and PC3 12. Verify the path traffic takes from PC1 to PC3.