Completion
Lab – Configure Windows Local Security Policy COMPLETION & SUBMISSION INSTRUCTIONS: 1. Use only this document for the lab completion and submission. 1. Do not remove any instructions or images from this file. 1. Rename the file name by replacing the “STUDENT NAME” text with your name. 1. Add your full name at the end these instructions. 1. Insert your screenshots when instructed by the instructor (the instructions are in red and highlighted). Use the Snipping Tool, not prt sc, for the screenshots. 1. Provide your answers only when instructed by the instructor (the instructions are in red and highlighted). Change the text color of your answers to green or blue. 1. After completing the lab, submit this document in its original format (.docx). GRADING: 1. If you do not change the answers color, you will lose up to 15%. 1. If you do not submit this document with your screenshots, you will lose up to 100%. 1. You will also lose points for providing incorrect answers or screenshots. STUDENT NAME: Lab – Configure Windows Local Security Policy Introduction In this lab, you will configure Windows Local Security Policy. Windows Local Security Policy is used to configure a variety of security requirements for stand-alone computers that are not part of an Active Directory domain. You will modify password requirements, enable auditing, configure some user rights, and set some security options. You will then use Event Manager to view logged information. Recommended Equipment A computer with Windows installed. Note: Accessing the Local Security Policy tool is slightly different, depending on the version of Windows. But after it is open, the configurations are the same for the remaining steps in this lab. Review the security requirements. A customer needs to have six stand-alone Windows computers at a branch office configured according to the security policy for the organization. These computers are not part of an Active Directory domain. The policies must be manually configured on each computer. The security policy is as follows: Passwords must be at least 8 characters. Passwords must be changed every 90 days. A user may change their password once a day. A user must use a unique password for at least 8 changes of the password. A password must consist of three of the following four elements: At least one lower case alpha character. At least one upper case alpha character. At least one numerical character. At least one symbol character. Users are locked out of the computer after 5 attempts to enter the correct password. A user must wait 5 minutes for the lookout counter to reset. Each security setting for Audit Policy should be enabled. After 30 minutes of inactivity, the user will be automatically logged out. (Windows 8.1 and 8.0 only) Users must login before removing a laptop from the docking station At login, users should be presented with the following title and text: Title: Caution: Text: Your activity is monitored. This computer is for business use only. Users will receive a reminder to change the password 7 days before it expires. The Windows Local Security Policy tool provides many more settings that are beyond the scope of this course. Open the Windows Local Security Policy tool. To access Local Security Policy in Windows 7 and Vista, use the following path: Start > Administrative Tools > Local Security Policy To access Local Security Policy in Windows 8 and 8.1, use the following path: Search > secpol.msc and then click secpol. The Local Security Policy window opens. This lab will focus on the Account Policies and Local Policies, as highlighted in the figure below. The rest of the Security Settings are beyond the scope of this course. Note: Screenshots from Windows 8.1 are used throughout this lab. Configure the Password Policy security settings. The first six requirements of the company’s security policy are configured in the Account Policies section of the Local Security Policy tool. Click the arrow next to Account Policies to expand it, and then click Password Policy. Six policies are displayed in the right panel with their associated default security settings. The first policy, Enforce password history, is used to set the number of unique passwords the user must enter before being allowed to reuse a password. According to the organization’s security policy in Step 1, the security setting for this policy should be 8. Double-click Enforce password history to open the Enforce password history Properties window. Set the value to 8. Using the security policy requirements in Step 1, fill in the values you should set in Local Security Policy for the remaining Password Policy security settings. Policy Security Setting Enforce password history 8 Maximum password age Minimum password age Minimum password length Password must meet complexity requirements Store passwords using reversible encryption Disabled Note: The Store passwords using reversible encryption security setting should always be disabled. Storing passwords using reversible encryption is essentially the same as storing plaintext versions of the passwords. For this reason, this policy should never be enabled unless application requirements outweigh the need to protect password information. Double-click on each of the policies and set the values according to your entries in the table above. When done, your configuration should look like the following: 1. INSTRUCTIONS: INSERT YOUR SCREENSHOT UNDER THIS TEXT SHOWING THE SAME INFORMATION AS THE ABOVE IMAGE. DO NOT REMOVE THIS TEXT AND THE ABOVE IMAGE. Configure the Account Lockout Policy security settings. According the security policy in Step 1, how many times is a user allowed to attempt to login before the account is locked? ____________________________________________________________________________________ How long should the user have to wait before attempting to log back in? ____________________________________________________________________________________ Use the Account Lockout Policy security settings in Local Security Policy to configure the policy requirements. When done, your configuration should look like the following. Hint: You will need to configure the Account lockout threshold first. 2. INSTRUCTIONS: INSERT YOUR SCREENSHOT UNDER THIS TEXT SHOWING THE SAME INFORMATION AS THE ABOVE IMAGE. DO NOT REMOVE THIS TEXT AND THE ABOVE IMAGE. Configure the Audit Policy security settings. In Local Security Policy, expand the Local Policies menu, and then click Audit Policy. Double-click Audit account logon events to open the Properties window. Click the Explain tab to learn about this security setting. Click the Security Setting tab, and then click the check boxes for Success and Failure. Click OK to close the Properties window and apply the security settings. Continue modifying the rest of the Audit Policy security settings. Click the Explain tab for each and read what it does. Click the Success and Failure check boxes in each Properties window. After you are done, your Audit Policy configuration should look like the following: 3. INSTRUCTIONS: INSERT YOUR SCREENSHOT UNDER THIS TEXT SHOWING THE SAME INFORMATION AS THE ABOVE IMAGE. DO NOT REMOVE THIS TEXT AND THE ABOVE IMAGE. Configure additional Local Policies security settings In Local Security Policy, click User Rights Assignment under Local Policies to view the security settings. Although none of the security settings need to be modified to meet the security policy requirements, spend some time viewing the default settings. Are there any you would recommend changing? Why? _________________________________________________________________________________ _________________________________________________________________________________ _________________________________________________________________________________ In Local Security Policy, click Security Options under Local Policies to view the security settings. Using the remaining security policy requirements in Step 1, list the policy and security setting values you need to change in Security Options in the table below. The first one is done for you. Policy Security Setting Interactive logon: Machine inactivity limit (Windows 8.1 and 8.0 only) 1800 seconds Test the password policy security settings. Test your password policy security settings by attempting to change the password. Try a new password that does not meet the length or complexity requirements. In Windows 7 and Vista, use the following path: Control Panel > User Accounts > Change your password In Windows 8.1, use the following path: Control Panel > User Accounts > Make changes to my account in PC settings > Sign-in options, and then click Change under Password. In Windows 8.0, use the following path: Control Panel > User Accounts > Make changes to my account in PC settings, and then click Change your password. You should be presented with a message that your new password does not meet password policy requirements, such as this message in Windows 8.1: Export and import security policy settings. The customer has another 5 stand-alone computers that must meet the same security policy requirements. Instead of manually configuring the settings each computer, export the settings on this computer. From the menu bar in Local Security Policy, click Action > Export policy... Use your name for the .inf file and save it to a location of your choice. Copy the security policy .inf file to a flash drive. Take the flash drive to another computer. Insert the flash drive, open Local Security Policy, and click Action > Import Policy... Locate the .inf on the flash drive and open it to apply the security policy to the new computer. 4. INSTRUCTIONS: DO NOT DO STEP 8c. INSTEAD, PASTE YOUR SCREENSHOT BELOW SHOWING THE .inf FILE WITH ITS FILE EXTENSION. DO NOT REMOVE THIS TEXT. © 2019 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.Page 1 of 10 © 2019 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.Page 10 of 10