Instructions As a network engineer for Kamehameha Institute, you will need to become familiar with the Packet Tracer simulation tool from Cisco. Packet Tracer is used to simulate and test network...

instructions included. you will need the files from task 1 to complete the assignment, i will submit it in the chat


Instructions As a network engineer for Kamehameha Institute, you will need to become familiar with the Packet Tracer simulation tool from Cisco. Packet Tracer is used to simulate and test network configurations. This allows you to work out and improve upon the settings before implementing them. Using the diagram and configuration information from your first task, create a Packet Tracer simulation. How Will My Work Be Evaluated? 1.1.3: Present ideas in a clear, logical order appropriate to the task. 10.1.1: Identify the problem to be solved. 10.1.2: Gather project requirements to meet stakeholder needs. 10.1.3: Define the specifications of required technologies. 13.1.1: Create documentation appropriate to the stakeholder. 13.2.1: Evaluate vendor recommendations in the context of organization requirements. network infrastructure design template Network Infrastructure Design Template for Kamehameha Institute Part 1: Complete the Router Networking Tables Table 1 lists the current Router Networking and Information for the organization. For your Part 1, use the information in this table to complete Tables 2, 3, and 4 below. Add additional rows if necessary. Table 1: Current Router Networking and Information Site number Honolulu Site Router 1 Management VLAN IP - 192.168.1.0 Production VLAN IP - 192.168.11.0 Internet VLAN IP- IP Assignments Loopback - 10.1.1.1/32 VPN Tunnels TBD - based on requirements Hilo Site Router 2 Management VLAN IP - 192.168.2.0 Production VLAN IP - 192.168.22.0 Internet VLAN IP- IP Assignments Loopback - 10.2.2.2/32 VPN Tunnels TBD - based on requirements Lihue Site Router 3 Management VLAN IP - 192.168.3.0 Production VLAN IP - 192.168.33.0 Internet VLAN IP- IP Assignments Loopback - 10.3.3.3/32 VPN Tunnels TBD - based on requirements Table 2: Honolulu Site 1 Net ID Usable Range Subnet Mask CIDR Value Broadcast 192.168.1.0 192.168.1.1 to 192.168.1.254 255.255.255.0 /24 192.168.1.255 192.168.11.0 192.168.11.1 to 192.168.11.254 255.255.255.0 /24 192.168.11.255 10.1.1.1 10.1.1.1 to 10.1.1.1 255.255.255.255 /32 10.1.1.1 Table 3: Hilo Site 2 Net ID Usable Range Subnet Mask CIDR Value Broadcast 192.168.2.0 192.168.2.1 to 192.168.2.254 255.255.255.0 /24 192.168.2.255 192.168.22.0 192.168.22.1 to 192.168.22.254 255.255.255.0 /24 192.168.22.255 10.2.2.2 10.2.2.2 to 10.2.2.2 255.255.255.255 /32 10.2.2.2 Table 4: Lihue Site 3 Net ID Usable Range Subnet Mask CIDR Value Broadcast 192.168.4.0 192.168.4.1 to 192.168.4.254 255.255.255.0 /24 192.168.4.255 192.168.44.0 192.168.44.1 to 192.168.44.254 255.255.255.0 /24 192.168.44.255 10.4.4.4 10.4.4.4 to 10.4.4.4 255.255.255.255 /32 10.4.4.4 Part 2: Design the Network Infrastructure Create a network drawing using Visio or Draw.io, specific to this organization listing the network’s topology. In your diagram, include any necessary hardware. The drawing should include enough detail to show the interconnections of the topology. You should label the networks well on your diagram. The viewer should be able to understand the Kamehameha Institute network environment and be able to implement the architecture you have developed. All devices require hostnames and should use the following naming conventions: · Routers: Rx; where x is the site number · Switches: Sx; where x is the site number · Include necessary details for high availability. · Any external source that is consulted should be cited properly. When you are finished, save the diagram as a PDF and submit it to the Assignment folder along with this template. Note: You will need to use this diagram in Project 3, so save the source file. 1 2