price
ICTNWK506 Configure, Verify and T.shoot WAN Links and IP Services in a Medium Ent. Network | Page 1 of 12 Version 4: July 2017 CRICOS Name: Pass Global Pty Ltd Trading as Australian Learning, Training & Education Centre Provider Code: 22034 CRICOS Code: 02926D 1. Assessment Tasks Assessment Task 1: Assessment Task Practical Tasks Outcomes Assessed Performance Criteria: 1.1, 1.2, 1.3, 1.4, 1.5, 1.6, 1.7 Addresses some elements of performance evidence and knowledge evidence as shown in the Assessment Matrix Description: These activities are being given as formative assessment tasks that will need to be completed during the training sessions. The trainer/assessor will schedule these tasks according to lesson plans and advise the students accordingly. Task1: Prepare and Install Medium Enterprise WAN Links ALTEC has a rack of CISCO routers that need to have serial caballing installed. Following OHS rules and ALTEC procedures, you are to gain access to the rack so that you can install and test serial cables between a pair of routers selected for you. ▪ Discuss with your trainer and clarify your task ▪ Access to any tools and cables that you might need ▪ Agreement with the trainer about the method you would use to console into the router for post cabling testing Task2: OHS and Test Report Based on your classroom learning and research, prepare a report that includes: ▪ A list of OHS considerations that may apply to the tasks; In particular quote the testing tag information that shows when the rack was last tested and approved by a licensed technician ▪ A summary of what ALTEC procedures you followed to secure access to the room that houses the rack of routers. Include the name(s) of ALTEC staff you saw and details of the conversation ▪ A step by step account of how you cabled and tested the serial connections ▪ A URL of a website that sells CISCO serial cables ▪ A brief description of the type of serial cable chosen, why you chose this type of cable, and the cable specifications ▪ A VISIO diagram or equivalent that shows two routers, the router platform (e.g. CISCO 2600XM), the port numbering (e.g. serial 0/2/0) of the two connected ports, the router serial numbers, and the IP addresses that will be applied to the serial ICTNWK506 Configure, Verify and T.shoot WAN Links and IP Services in a Medium Ent. Network | Page 2 of 12 Version 4: July 2017 CRICOS Name: Pass Global Pty Ltd Trading as Australian Learning, Training & Education Centre Provider Code: 22034 CRICOS Code: 02926D Assessment Criteria ▪ Clarified and understood the given task ▪ Accessed and obtained the required tools and resources ▪ Identified the right equipment ▪ Followed the given instructions and established methods for caballing ▪ Researched and documented cable specifications ▪ Described the reasons for using the given cable ▪ Prepared a VISIO diagram showing router platform and serial routers with port numbers and IP addresses ▪ Connected the given routers according to the diagram ▪ Routers are serially connected with secured cables and tags ▪ Connections are tested using physical connections, network activity, IP address, and pinging ▪ Prepared a report describing step-by-step process for connecting and testing routers ▪ Outlined OHS requirements for the task Submission Guidelines These are practical tasks and must be completed in presence of an assessor on the designated sessions. Assessments will be marked by observation; Assessor is satisfied that all the tasks are completed as required. Submit the Word-processed report for marking using an assignment cover sheet. ICTNWK506 Configure, Verify and T.shoot WAN Links and IP Services in a Medium Ent. Network | Page 3 of 12 Version 4: July 2017 CRICOS Name: Pass Global Pty Ltd Trading as Australian Learning, Training & Education Centre Provider Code: 22034 CRICOS Code: 02926D Assessment Task 2: Assessment Task Configure and Verify WAN Links Outcomes Assessed Performance Criteria: 2.1., 2.2, 2.3, 2.6, 2.7, 3.5, 3.6 Addresses some elements of performance evidence and knowledge evidence as shown in the Assessment Matrix Description: This is a scenario based task. In this practical task, you will be configuring two WAN protocols, HDLC and PPP on the given network. Assume that you work for a training company that has two LANs in different sites that need to be connected using a basic HDLC serial connection. Before carrying out the task, you will simulate the activity using a lab rack of testing equipment or using a Packet Trace Topology. ▪ Discuss and clarify the task with the trainer ▪ In particular, decide whether the task will be done using access to CISCI routers or using Packet Tracers ▪ Access to a guide on Cabling a Network and Basic Router Also, in a separate word document; ▪ Research and describe different methods for connecting to a wide area network (WAN) ▪ Describe asymmetric digital subscriber line (ADSL) technology Topology Diagram 192.168.1.0/24 192.168.2.0/24 192.168.3.0/24 Fa0/0 S/0/0 Fa0/0 R1 R2 S/0/0/0 DCE Addressing Table Device Interface IP Address Subnet Masks Default Gateway R1 Fa0/0 192.168.1.1 255.255.255.0 N/A S0/0/0 192.168.2.1 255.255.255.0 N/A R2 Fa0/0 192.168.3.1 255.255.255.0 N/A S0/0/0 192.168.2.2 255.255.255.0 N/A PC1 PC2 ICTNWK506 Configure, Verify and T.shoot WAN Links and IP Services in a Medium Ent. Network | Page 4 of 12 Version 4: July 2017 CRICOS Name: Pass Global Pty Ltd Trading as Australian Learning, Training & Education Centre Provider Code: 22034 CRICOS Code: 02926D PC1 N/A 192.168.1.10 255.255.255.0 192.168.1.1 PC2 N/A 192.168.3.10 255.255.255.0 192.168.3.1 Task1: You will complete; ▪ Cable devices and establish console connections ▪ Erase and reload routers ▪ Perform basic IOS command line interface operations ▪ Perform basic router configuration ▪ Verify and test configurations using show commands, ping, and traceroute Task 2: ADSL Connections Set up an ADSL connection using the following addressing table; Topology: Internet Server > ISP ISP> Service Provider DSL Network DSL Network > ADSL Modem ADSL Modem > Router Home Router > User PC Addressing Table Device Interface IP Address Subnet Masks ISP Int vLAN to server 10.1.10.1 255.255.255.0 Fa0/0 to Cloud 1.1.1.1 255.255.255.0 Router Fa0/0 to modem DHEP e.g. 1.1.1.2 255.255.255.0 Fa0/0 to User PC 192.168.0.1 255.255.255.0 Internet Server Fa0/0 to ISP router 10.2.2.2 255.255.255.0 User PC NIC DHEP e.g. 192.168.1.10 255.255.255.0 1. Set up this ISP ADSL user topology given video/oral instructions URL: http://www.youtube.com/watch?v=C6sUesMysfQ DSL Connection with Packet Tracer by Wellman 2. Configure so that the user PC has internet access; showing NAT translations on user router 3. Upon completion, search and write a brief report comparing ADSL and Cable Broadband technologies http://www.youtube.com/watch?v=C6sUesMysfQ ICTNWK506 Configure, Verify and T.shoot WAN Links and IP Services in a Medium Ent. Network | Page 5 of 12 Version 4: July 2017 CRICOS Name: Pass Global Pty Ltd Trading as Australian Learning, Training & Education Centre Provider Code: 22034 CRICOS Code: 02926D describing advantages and disadvantages of each. Assessment Criteria ▪ Clarified and understood the given task ▪ Accessed and obtained the required tools and resources ▪ Identified the right equipment ▪ Cabled devices and establish console connections ▪ Erased and reloaded routers ▪ Configured routers using HDLC and PPP configuration techniques ▪ Performed basic IOS command line interface operations ▪ Identified and debugged errors ▪ Performed basic router configuration ▪ Verified and tested configurations using show commands, ping, and traceroute ▪ Researched and described different methods for connecting to a wide area network (WAN) ▪ Described asymmetric digital subscriber line (ADSL) technology ▪ Provided a report on advantages and disadvantages of ADSL and Cable broadband technologies ▪ Cabled all the various hardware component so that initially the topology agrees with the flow required ▪ The ISP router can ping the internet server ▪ The user router dynamically obtains an IP address from the pool 1.1.1.0/24 ▪ The user PC dynamically obtains an IP address from the pool 192.168.0.0/24 ▪ The PC can access the internet ▪ The connection from the user PC to the ISP produces NAT translations on the user router ▪ Cited external sources using an appropriate referencing system Submission Guidelines This is a practical task and must be completed in presence of an assessor on the designated sessions. Assessments will be marked by observation; Assessor is satisfied that all the tasks are completed as required. Submit the Word-processed report for marking using an assignment cover sheet. ICTNWK506 Configure, Verify and T.shoot WAN Links and IP Services in a Medium Ent. Network | Page 6 of 12 Version 4: July 2017 CRICOS Name: Pass Global Pty Ltd Trading as Australian Learning, Training & Education Centre Provider Code: 22034 CRICOS Code: 02926D Assessment Task 3: Assessment Task Site to Site VPN Outcomes Assessed Performance Criteria: 2.4, 2.5 Addresses some elements of performance evidence and knowledge evidence as shown in the Assessment Matrix Description: This will be a simulated task