i need you to do only . PARTS 1 AND 2; MANUAL DESIGNS OF CROSS-SECTIONS AND HORIZONTAL ALIGNMENT
1 CVE20005 ROAD ENGINEERING; ROAD GEOMETRIC AND PAVEMENT DESIGN PROJECT TOTAL MARKS = 100; ACTUAL ALLOCATED MARKS = 50 Introduction This design project is in SIX parts. Parts 1, 2 and 3 involve manual design of typical cross- sections, horizontal alignment (HAL) and vertical alignment (VAL). Parts 4, 5 and 6 involve manual design of a suitable granular pavement, completing/optimising the road design in AutoCAD Civil Site Design (CSD) module and analysing final Earthworks (EW) report. All formulae, charts and tables that you need are available in Appendices A-D at the end of this document. Instructions 1. Work in groups of THREE. • You can find partners using the nominated discussion board on Canvas. 2. Submissions: • Reports: GROUP SUBMISSIONS i.e. each group submits ONE REPORT ONLY for each of the submissions detailed below. o Each report should have the provided ASSIGNMENT COVER SHEET with signatures of ALL members and % contributions. • Electronic files of AutoCAD CSD: INDIVIDUAL SUBMISSION i.e. each member should submit own files. • All submissions should be uploaded using the nominated pages in Canvas before the due dates/times of each submission. 3. Help: For help with the different parts of the assignment and software application, please see next page for dates of consultation sessions. • Please keep in mind that you can ONLY get help during these sessions. • Tutors can help with the manual designs ONLY • CSS staff can help with the application of software ONLY 4. All manual designs/drawings SHOULD BE DONE IN WORD. Convert your complete report into pdf before submitting. Submissions and Due Dates 1. GROUP RPORT (Pdf) Submission for Parts 1 & 2: Manual designs of cross sections and horizontal alignment including hand calculations. • Date: Midnight on Sunday 6th of September (week 6). • Keep a copy of your designs to use in AutoCAD CSD • Marks allocated: 10 for cross-sections and 25 for HAL = 35 2. GROUP REPORT (Pdf) Submission for Part 3: Manual design of vertical alignment design and hand calculations • Date: Midnight on Sunday 27th of September (week 8) • Keep a copy of your design to use in AutoCAD CSD • Marks allocated = 35 2 3. GROUP REPORT (Pdf) Submission for Parts 4 & 5: manual pavement design, optimised VAL design and analysis of EW report. • Date: Midnight on Monday 12th of October (week 10) • Marks allocated = 25 4. INDIVIDUAL Submission for Part 6; Electronic files of final design in AutoCAD CSD: • Date: Midnight on Monday 12th of October (week 10) • Marks allocated = 5 AutoCAD CSD topics 1. Week 6: Input manual HAL design and a typical cross-section in CSD and produce existing longitudinal profile along the route to use for VAL manual design. 2. Week 8: Input manual VAL design in CSD and produce initial EW report. 3. Week 9: In CSD, input outputs of manual pavement design, superelevation, optimise VAL design and produce final EW, longitudinal profile and cross-sections. Consultations with CSS staff and Tutors • Once you submit the manual designs of Parts 1 & 2 on Sunday 6/9 you should start immediately working on inputting your design into AutoCAD CSD to produce the long profile along your designed route. You have 2 days ONLY (7&8 Sept) to post your questions (if any) for CSS staff. • The same applies to Part 3 manual design, where you have 2 days ONLY (28 & 29 Sept) to input your design in CSD and prepare your questions (if any) for posting. Dates Consultations topics, sessions and responsible staff 31/8 & 1/9 Week 5 Consultation with tutors about DP Part 2- live sessions during tutorials times 9 & 10 Sept Week 6 Computer lab – HAL and cross-section designs (DP Parts 1 & 2) in AutoCAD CSD- View training recording on your own Consultation with CSS staff on using AutoCAD CSD for DP Parts 1 & 2- live sessions during allocated computer lab times 22 & 23 Sept Week 7 Consultation with tutors for DP Part 3- live sessions during allocated computer lab times Week 8 30 Sept & 1 Oct 28 & 29 Sept Computer lab- VAL design (DP part 3) in AutoCAD CSD - View training recording on your own Consultation with CSS staff on using AutoCAD CSD for DP Part 3- live sessions during allocated computer lab times Consultation with tutors for DP Parts 4 &5 - live sessions during tutorial times 7 & 8 Oct Week 9 Computer lab- Complete and Optimise DP design (Parts 4, 5 & 6) - View training recording on your own Computer lab: Consultation with CSS staff on using AutoCAD CSD to develop the final optimised alignment design - live sessions during allocated computer lab times • Consultation sessions during Computer lab sessions in weeks 6, 7, 8 & 9 are on: o Wednesdays: 8.30– 10.30am, 11.30-1.30 pm, 2.30-4.30pm o Thursdays: 8.30– 10.30am, 11.30-1.30 pm, 2.30-4.30pm • Consultations during Tutorial sessions in weeks 5 & 8 are on: o Mondays: 4.30-6.30 o Tuesdays: 8.30-10.30, 10.30-12.30, 12.30-2.30, 2.30-4.30, 4.30-6.30 3 Contents 1. OBJECTIVES AND BRIEF OF DESIGN PROJECT ............................................................ 4 1.1 OBJECTIVES................................................................................................................... 4 1.2 PROJECT BRIEF ............................................................................................................ 4 1.3 IMPORTANT NOTES ...................................................................................................... 4 2. PARTS 1 AND 2; MANUAL DESIGNS OF CROSS-SECTIONS AND HORIZONTAL ALIGNMENT ................................................................................................................................... 5 2.1 PART 1; CROSS- SECTIONS DESIGN ............................................................................. 5 2.2 PART 2: DESIGN OF HORIZONTAL ALIGNMENT (HAL) .......................................... 5 2.2.1 OBJECTIVES OF HAL DESIGN: ........................................................................... 5 2.2.2 MANUAL DESIGN OF HAL .................................................................................... 5 2.3 SUBMISSION AND REPORTING REQUIREMENTS- Parts 1&2 .........