Ch. 5 in Fluid Mechanics by Cengel Cimbala, 3rd edition 1) Time how long it takes to fill a known bucket with water. Then calculate the flow rate, mass flow rate, and the average velocity of the water...

I need help with the MATLAB script for problem #2. The answer should be 15.45 hours. Annotations of each step and formulas used need to be added to the script.


Ch. 5 in Fluid Mechanics by Cengel Cimbala, 3rd edition 1) Time how long it takes to fill a known bucket with water. Then calculate the flow rate, mass flow rate, and the average velocity of the water coming out of the hose. 2) * Do this problem by hand and in Matlab – use the differential equation method that was shown to you in class. 3) 5-44 The air velocity in the duct of a heating system is to be measured by a Pitot-static probe inserted into the duct parallel to the flow. If the differential height between the water columns connected to the two outlets of the probe is 2.4 cm, determine (a) the flow velocity and (b) the pressure rise at the tip of the probe. The air temperature and pressure in the duct are 45°C and 98 kPa, respectively. ANS: P2-P1 = 235 Pa, V1 = 21 m/s 4) ANS: V1 = 31 m/s 5) Water flows steadily through the large tanks shown in Figure 3. Determine the water depth, hA. ANS: 15.4 m