Follow instructions and answer questions. Make sure you send Cisco Packet Tracer back

NET463-365-Lab2-Answers
NET 463/365
Lab #2 – EIGRP Lab
ANSWERS DOCUMENT
Due August, 2, 2022 by 11:59 pm
Your Name:
You should read the Lab#2 Assignment Document before reading this one. You can type
your answers into this document or create a separate one. When complete, save answers
file as PDF and submit for your Lab#2 assignment on D2L.
IP Subnet Design
Enter the Subnet information for all lab subnets into Table #1 below.
Table #1: IP Subnet Design
Subnet
Name
Subnet ID
(network address
and /n)
Size
= 2[32-n]
First Valid
Host IP
Last Valid
Host IP
Subnet A 22.22.22.0 / 24 256 22.22.22.1 22.22.22.254
Subnet B 172.11.5.0 / 28 16 172.11.5.1 172.11.5.14
Subnet C 172.11.5.16 / 28 16 172.11.5.17 172.11.5.30
Subnet D 88.88.88.0 / 24 256 88.88.88.1 88.88.88.254
Subnet E 22.22.5.0 / 30 4 22.22.5.1 22.22.5.2
Link 1 200.0.0.4 / 30 4 200.0.0.5 200.0.0.6
Link 2 200.0.0.8 / 30 4 200.0.0.9 200.0.0.10
IP Address Plan
Now, based on your IP Subnet Design above and the network diagram, assign a specific
IP address and subnet mask to each interface and enter it into the table below.
Table #2: IP Address Plan
Device Interface IP Address Mask
R1 Fa0/0 22.22.22.1 255.255.255.0
R1 Fa0/1 22.22.5.2 255.255.255.252
R1 S0/2/0 200.0.0.5 255.255.255.252
R2 S0/2/0 200.0.0.6 255.255.255.252
R2 Fa0/0 172.11.5.17 255.255.255.252
R2 Loopback0 172.11.5.1 255.255.255.240
R3 Fa0/0 88.88.88.1 255.255.255.0
R3 Fa0/1 172.11.5.18 255.255.255.252
R3 S0/2/0 200.0.0.10 255.255.255.252
R4 Fa0/0 22.22.5.1 255.255.255.252
R4 S0/2/0 200.0.0.9 255.255.255.252
Host #1...