file sent, Part 2, i have done part 1 which is the quiz
Participant Guide Assessment 2 BSBADM506 Manage business document design and development Student name: ______________ Student number: ____________ Assessment number: 31938B/02 © 2015 Innovation and Business Industry Skills Council Ltd All rights reserved. Apart from any use permitted under the Copyright Act 1968, no part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, or otherwise, without written permission from the publisher, Innovation and Business Industry Skills Council Ltd (‘IBSA’). Use of this work for purposes other than those indicated above, requires the prior written permission of IBSA. Requests should be addressed to Product Development Manager, IBSA, Level 11, 176 Wellington Parade, East Melbourne VIC 3002 or email
[email protected]. ‘Innovation and Business Skills Australia’, ‘IBSA’ and the IBSA logo are trademarks of IBSA. Disclaimer Care has been taken in the preparation of the material in this document, but, to the extent permitted by law, IBSA and the original developer do not warrant that any licensing or registration requirements specified in this document are either complete or up-to-date for your State or Territory or that the information contained in this document is error-free or fit for any particular purpose. To the extent permitted by law, IBSA and the original developer do not accept any liability for any damage or loss (including loss of profits, loss of revenue, indirect and consequential loss) incurred by any person as a result of relying on the information contained in this document. The information is provided on the basis that all persons accessing the information contained in this document undertake responsibility for assessing the relevance and accuracy of its content. If this information appears online, no responsibility is taken for any information or services which may appear on any linked websites, or other linked information sources, that are not controlled by IBSA. Use of versions of this document made available online or in other electronic formats is subject to the applicable terms of use. To the extent permitted by law, all implied terms are excluded from the arrangement under which this document is purchased from IBSA, and, if any term or condition that cannot lawfully be excluded is implied by law into, or deemed to apply to, that arrangement, then the liability of IBSA, and the purchaser’s sole remedy, for a breach of the term or condition is limited, at IBSA’s option, to any one of the following, as applicable: if the breach relates to goods: (i) repairing; (ii) replacing; or (iii) paying the cost of repairing or replacing, the goods; or if the breach relates to services: (i) re-supplying; or (ii) paying the cost of re-supplying, the services. Published under license by Open Colleges Pty Ltd, 2015 Content developed and owned by IBSA, contextualised by Open Colleges (2015) for client needs. Printed in Australia. Competency details BSBADM506 Manage business document design and development This unit describes the skills and knowledge required to establish standards for the design and production of organisational documents and to manage document design and production processes to ensure agreed standards are met. It applies to individuals employed in a range of work environments who require well-developed skills in the use of a range of software packages to establish, document and implement consistent standards of document design within an organisation. Assessment outline All assessment tasks must be completed to pass the unit. Assessment task Word limit Assessment 1: Auto-mark quiz Requires you to answer quiz questions online. N/A Assessment 2: Document standards and processes Requires you to complete a set of document processes and standards with a template. 650 words + Template Assessment 3: Testing, training and review Requires you to submit evidence of training, testing and reviewing documents. 400 words + Evidence requirement The auto-mark questions (Assessment 1) are stand alone, and must be completed separately from Assessments 2, and 1.3. These are completed online. You are required to complete Assessments 2 and 3 with reference to: (a) a workplace project, or (b) the MacVille cafes study provided. Instructions Once you feel confident that you have covered the learning materials for this unit, you are ready to attempt this assessment. Construct your assessment in a commonly used software program such as Microsoft Word, or you can download a Microsoft Word copy of this assessment from the relevant study period of your course in OpenSpace. To help Open Colleges manage your assessment, please use the following file-naming convention when you save your Microsoft Word document. Your file should be named and saved to your computer’s hard drive using your [student number]_[assessment number].doc For example, 12345678_21850a_01.1.doc Assessment submission When you are ready to submit your assessment, upload the file in OpenSpace using the Assessment Upload links in the relevant module of your course. The Student Lounge provides a 'Quick Guide to Uploading Assessments' if you need further assistance. Uploading assessments in OpenSpace will enable Open Colleges to provide you with the fastest feedback and grade on your assessment. It is important that you keep a copy of all electronic and hardcopy assessments submitted to Open Colleges. Alternatively, you can print and post your assessment to Open Colleges, PO Box 1568, Strawberry Hills, NSW 2011.2. Please ensure that you use the Open Colleges Assessment Cover Sheet (available in the Student Lounge in OpenSpace). Where assessments are submitted by post, grades and feedback will be released in OpenSpace. Please note that assessments submitted by post may take up to 21 days from the date received by Open Colleges to grade and are reliant on the efficiency of the postal service. Note: Please submit all assessment components in one file, or with as few attachments and separate documents as possible; ie. do not include templates or emails in separate documents – place them all in the one document. Assessment 2 – Document standards and processes Introduction: You are a new recruit from AMPLITUDE management consultancy. Co-owner Sarah McCarthy has sent you on assignment to the client firm ‘MacVille Cafes’. Create a set of document standards and processes for MacVille Cafes. As part of your processes, you must create a Word template that includes macros for specific design features, such as headings and page layout. The information for the scenario is supplied in the file ‘MacVille Cafes Case Study Scenario’ found in the ‘Additional Resources’ icon on the top left of OpenSpace. Your document process, standards and template must include each of the parts specified below. Part A Outline the needs of the organisation in relation to implementing a new document system. Part B List three organisations external to yours that can supply technical assistance with building macros. Part C Prepare a process showing how documents are to be produced. Part D Make a list of five types of documents used by the organisation. Part E Prepare a one-page template that contains the key style requirements for documents for the organisation. Specifications Your standards and processes must include the following as a minimum: Part A – Organisational needs Outline the needs of the organisation in relation to implementing a new document system. Briefly describe the organisation’s needs in relation to: · information technology capabilities and software application requirements (refer to Topic 1.1.6 of the Module for more information) · legislative requirements (refer to Topic 1.1.2 of the Module for more information) · costs (refer to Topic 1.1.7 of the Module for more information) · relevant organisational policies and procedures (refer to Topic 1.1.2 in the Module for more information). If you are using the case study, look at the Current Technology, Budget and Style Guide sections to assist you. Use the Appendix 1 template to assist you. (200 words) Part B – Help List three organisations external to yours that can supply technical assistance with building macros. Do an internet search for relevant organisations to act as your help sources. Try search for word processing professionals, IT professionals, graphic designers, editors or printers. (50 words) Part C – Production processes Describe the steps in the document production process. Review Topic 1.1.6 in your Module for more information. The process of producing documents is an iterative process involving drafting, checking, and revising the document. It should continue until a document of acceptable quality is produced (100 words). Part D – Documents Review Topic 1.1.4 in your Module then list five types of documents used by the organisation. Documents are written, printed, or electronic matter that provides information or evidence or that serves as an official record (50 words). Part E – Document template 1. Prepare a one-page template that contains the key style requirements for documents for the organisation, including: · font · spacing · bullet and numbering standards · headings · margins As part of the template, create the following macros that automatically insert the company details: · name · company address · company phone number · email address If you are using the case study, look at the organisational Style Guide for advice on how to layout the template. · For more information on how to create a template, review Topic1.2 of the Module · To set up your font, spacing headings, bullets and adjust the styles in Word, refer to Topic 1.3.1 in the Module · For instructions on how to record macros, refer to Topic 1.3.3 in the Module 2. Once you have created the template explain each of the design features and macros used in the template. In your explanatory page, provide an: · overview of the style requirements (if using the case study, refer to the Style Guide for more information) · explanation of how to use the macros (i.e. what keys to press and what each macro will do) Make sure that your explanatory page is clear as you will need to refer to it in your next assessment. (250 words) Appendices Appendix 1: Organisational needs analysis template ORGANISATIONAL NEEDS ANALYSIS Technology capabilities Legal requirements Budget Relevant organisational policies and procedures 8 Open CollegesBSBADM506 Manage business document design and developmentPage 8 of 8