Engineering Mechanics II, Dynamics (ENGR2302) Engineering Graphics ( Online (Total = 100 points) II. Technical Drawing. 1. Create the model of the cover as shown in Figure XXXXXXXXXXpoints) 2. Create...

done CREO software NO OTHER software..


Engineering Mechanics II, Dynamics (ENGR2302) Engineering Graphics ( Online (Total = 100 points) II. Technical Drawing. 1. Create the model of the cover as shown in Figure 1-1. (25 points) 2. Create the model of the cover as shown in Figure 2-1. (25 points) 3. Create the model of the cover as shown in Figure 3-1. (25 points) II. Technical Drawing. (Total = 75 points) 1. Please create the Press Tool assembly shown in Figure 1. ( parts = 20 points; assembly = 25 points) The front and right views of the Press Tool assembly are shown in Figure 2 and 3. The exploded state of the assembly is shown in Figure 4 and the dimensions of the components of the Press Tool assembly are shown in Figures 5 through 7. 2. Create an exploded state of the assembly in the assembly mode. (5 points) 3. Generate the drawing views with dimensions of the Bottom Plate and the Guide Bush on A4 size sheet, as shown in Figure 8 and Figure 9. a. Bottom Plate- including top view, front view, right view and isometric view. (10 points) b. Guide Bush- including top view, front view, sectioned right view, detailed view of chamfer and isometric view. (15 points) Figure 1. The completed Press Tool assembly after assembling the Top Plate with the assembly 20 Figure 3. Right View of the Press Tool Assembly Figure 2. Front View of the Press Tool Assembly Figure 5. Dimensions and views of the Bottom Plate Figure 4. The exploded view of the Press Tool assembly Figure 7. Dimensions and views of the Guide Pillar and Guide Bush Figure 6. Dimensions and views of the Top Plate Figure 8. The required drawing views of the Bottom Plate Figure 9. The required drawing views of the Guide Bush