DO 51 52 INPUT PORT 1 MICROPROCESSOR 53 54 F1H 8085 55 SG D7 D7 SO P ON 00 51 01 M ON 52 E-ON INPUT PORT 2 02 OUPUT PORT 53 POFF 03 F2 H FOH 54 04 B1 55 O5 B2 56 06 B3 57 07 B4 D7 D7 *There are two...

Please write assembly lnguage program on sim8085

Extracted text: DO 51 52 INPUT PORT 1 MICROPROCESSOR 53 54 F1H 8085 55 SG D7 D7 SO P ON 00 51 01 M ON 52 E-ON INPUT PORT 2 02 OUPUT PORT 53 POFF 03 F2 H FOH 54 04 B1 55 O5 B2 56 06 B3 57 07 B4 D7 D7 *There are two input ports F1H and F2H and one output port FOH. *All the switches of F1H&F2H are connected to the data line Do to D7 of 8085 microprocessor. *All DO to D7 lines of 8085 are connected to 00 to 07 of output port. Write program for the following instructions: 1. Only when both the S0 switch of F1H & F2H are ON, the O4 to 07 belts should be ON irrespective of the conditions of both 54 to S7 switch positions. 2. If the both the S0 switches are on, the P-ON light should be enabled followed the conveyer belt operatlon. 3. When the conveyer belts are started to process, the M-ON light should the indicated. 4. If there is any emergency condition, E-On alarm should be enabled followed by the switching off the conveyer belts. 5. If the conveyer belts are stopped, the P-OFF indicator should be enabled. Since we don't have the output port operation in the simulator, you can use the following to indicate the output process on. Output devices ON condition OFF condition 00 Store 01H in 2000H Store OFH in 2000H 01 Store 01H in 2001H Store OFH in 2001H 02 Store 01H in 2002H Store OFH in 2002H Store 01H in 2003H Store OFH in 2003H 04 Store 01H in 2004H Store OFH in 2004H 05 Store 01H in 2005H Store OFH in 2005H Store 01H in 2006H Store OFH in 2006H 07 Store 01H in 2007H Store OFH in 2007H 36888888