Complete the following: Choose the three frequencies for the picked-up signal in kilohertz and make sure they are 10kH apart. Assume that Rp and Rs are 1 and 50 dB respectively. Use MATLAB to find...

Complete the following:

1. Choose the three frequencies for the picked-up signal in kilohertz and make sure they are 10kH apart.


2. Assume that Rp and Rs are 1 and 50 dB respectively.


3. Use MATLAB to find each filter order using table 8.1 in CS textbook on page 397. MATLAB will return the filter order and Wn.


4. Then use table 8.3 on page 399 in CS textbook to find the transfer function for each filter. Find two transfer functions for each filter: one for Butterworth and the other for Bessel.


5. Plot the frequency response for each filter (Butterworth and Bessel) and label properly.


6. Use MATLAB to obtain the output for each filter (Butterworth and Bessel) when the input is a combination of all three signals at the receiver output. Label the graphs.


7. Compare the results and draw your conclusion.