Cisco Network Routing Module 03 Project Template SomeCompany’s CTO has reconsidered the department subnet plan (from Module 1) versus building/floor subnet plan (from Module 2) and has decided to go...

Cisco Network Routing Module 03 Project Template

SomeCompany’s CTO has reconsidered the
department subnet plan (from Module 1)versus
building/floor subnet plan (from Module 2)and has
decided to go with the department subnet plan as outlined in Module 01. (As a reminder, this plan calls for the deployment of three routers to allow communication between the 3 buildings on their campus. Each department will deploy its own switch which will be connected to an interface on the related building router.) The CTO wants the routers configured to allow the maximum number of IP addresses in each department subnet, using the Class B address space: 172.18.0.0.

Update the logical network diagram from Module 01 to represent the desired network layout. In addition to the Interface labels, include the IP Addresses of the labels. Please include the map in the designated area below.

Then, work on the router configuration information. Provide the lines of CLI to assign the needed IP Address to each interface in use (note: not all interfaces should receive an IP Address).

Router CLI

(Provide the configuration lines to assign interface IP Addresses for each of the routers below. To help determine where in the configuration we are, include the CLI prompts. An example is given in the first line.)

Building 1 Router

Building 2 Router

Building 3 Router