BSB51415 Diploma of Project Management

BSBPMG513_AE_Pro_1of2 Project Assessment (Event 2 of 2) Criteria Unit code, name and release number BSBPMG513 Manage project quality (2) Qualification/Course code, name and release number BSB51415 Diploma in Project Management (4) Student details Student number Student name Assessment Declaration This assessment is my original work and no part of it has been copied from any other source except where due acknowledgement is made. No part of this assessment has been written for me by any other person except where such collaboration has been authorised by the assessor concerned. I understand that plagiarism is the presentation of the work, idea or creation of another person as though it is your own. Plagiarism occurs when the origin of the material used is not appropriately cited. No part of this assessment is plagiarised. Student signature and Date Document titleVersion 1.0Page 1 of 1 Disclaimer:  Printed copies of this document are regarded as uncontrolled. Please check to ensure this is the latest version. © 2011 Department of Education and Communities, TAFE NSW eLearning Hub | Version: 0.0 | Created: dd/mm/2011 Document title: BSBPMG513_AE_Pro_1of2Page 1 of 13 Resource ID: TBS_18_008_ BSBPMG513_AE_Pro_1of2 STUDENT NAME: Version:1.0 Date created:17/12/2018 Date modified:21/12/2018 For queries, please contact: Technology and Business Services SkillsPoint, Ultimo © 2018 TAFE NSW, Sydney RTO Provider Number 90003 | CRICOS Provider Code: 00591E This assessment can be found in the: Learning Bank The contents in this document is copyright © TAFE NSW 2018, and should not be reproduced without the permission of the TAFE NSW. Information contained in this document is correct at time of printing 20 December 2018. For current information please refer to our website or your teacher as appropriate. Document titleVersion 1.0Page 1 of 1 Disclaimer:  Printed copies of this document are regarded as uncontrolled. Please check to ensure this is the latest version. © 2011 Department of Education and Communities, TAFE NSW eLearning Hub | Version: 0.0 | Created: dd/mm/2011 Assessment instructions Assessment details Instructions Assessment overview The objective of this assessment is to assess your research on managing quality for your identified project. Assessment Event number 1 Instructions for this assessment This is a research-based assessment and will be assessing you on your performance of the unit. This assessment is in two parts and includes an Assessment Feedback form: 1. Project: research-based tasks, Tasks 1-3 2. Assessment Feedback Submission instructions On completion of this assessment, you are required to upload it or hand it to your assessor for marking. Ensure you have written your name at the bottom of each page of this assessment. It is important that you keep a copy of all electronic and hardcopy assessments submitted to TAFE and complete the assessment declaration when submitting the assessment. What do I need to do to achieve a satisfactory result? To achieve a satisfactory result for this assessment all questions must be answered correctly. What do I need to provide? Pens and computer with appropriate software and internet access (if working off campus) What the assessor will provide? Computer with appropriate software and internet access (if working on campus) Due date and time allowed Refer to Unit Assessment Guide. Assessment feedback, review or appeals Appeals are addressed in accordance with Every Students Guide to Assessment. Specific task instructions The instructions and the criteria in the tasks and activities will be used by the assessor to determine if you have satisfactorily completed this assessment event. Use these instructions as a guide to ensure you demonstrate the required performance for this unit. Before you start this assessment In order to complete the (3) tasks successfully you must first complete the relevant topics in the workbook. You will need to select a context for your assessment. This context may be an identified project for your current organisation or a previous organisation. Alternately, you may select a project identified from the Plan2Go scenario. Project – Research-based task To complete this part of the assessment, you will be required to complete all tasks below. Once completed you will need to submit this assessment to your assessor for marking. Task 1: Research-based task on identifying quality requirements This task is a written task to demonstrate your ability in identifying quality requirements. Based on your selected project, respond to the following questions. 1. Review Activity 1.1 to determine quality objectives and standards with input from stakeholders, relevant to your identified project. As a guide, your response should be approximately 100-150 words. 2. Review Activity 1.2 and document, as part of the quality management plan, quality metrics for the project and product output for your identified project. As a guide, your response should be approximately 100-150 words. 3. Review Activity 1.3 and select established quality management methods, techniques and tools to resolve quality issues for your identified project. As a guide, your response should be approximately 100-150 words. 4. Review Activity 1.4 on how to distribute, discuss and support quality requirements with the project team and key stakeholders, relevant to your identified project. As a guide, your response should be approximately 100-150 words. 5. Review Activity 1.6 and include agreed quality requirements for the project management plan to implement as basis for performance measurement. As a guide, your response should be approximately 100-150 words. Task 2: Research-based task on implementing quality processes 1. Review Activity 2.1 to undertake quality assurance audit of project processes for compliance with agreed plans, relevant to your identified project. As a guide, your response should be approximately 100-150 words. 2. Review Activity 2.2 and assess quality control of project and product output according to agreed quality specifications. As a guide, your response should be approximately 100-150 words. 3. Review Activity 2.4 and identify causes of variance to quality metrics and undertake remedial action, relevant to your identified project. As a guide, your response should be approximately 100-150 words. 4. Review Activity 2.5 on maintaining a quality management system to enable accurate and timely recording of quality audit data, relevant to your identified project. As a guide, your response should be approximately 100-150 words. Task 3: Research-task on implementing project quality improvements 1. Review Activity 3.1 for review processes to implement agreed changes continually throughout the project life cycle, ensuring continuous quality improvement, for your identified project. As a guide, your response should be approximately 100-150 words. 2. Review Activity 3.2 and review project outcomes against performance requirements to determine effectiveness of quality-management processes and procedures for your identified project. As a guide, your response should be approximately 100-150 words. 3. Review Activity 3.2 and identify and document (2) lessons learned and recommended improvements from your identified project. As a guide, your response should be approximately 100-150 words. Assessment Feedback NOTE: This section must have the assessor signature and student signature to complete the feedback. Assessment outcome ☐ Satisfactory ☐ Unsatisfactory Assessor Feedback ☐ Was the assessment event successfully completed? ☐ If no, was the resubmission/re-assessment successfully completed? ☐ Was reasonable adjustment in place for this assessment event? If yes, ensure it is detailed on the assessment document. Comments: Assessor name, signature and date: Student acknowledgement of assessment outcome Would you like to make any comments about this assessment? Student name, signature and date NOTE: Make sure you have written your name at the bottom of each page of your submission before attaching the cover sheet and submitting to your assessor for marking. BSBPMG513_AE_Kn_1of2 Knowledge Assessment (Event 1 of 2) Criteria Unit code, name and release number BSBPMG513 Manage project quality (Release 2) Qualification/Course code, name and release number BSB51415 – Diploma of Project Management (Release 4) Student details Student number Student name Assessment Declaration This assessment is my original work and no part of it has been copied from any other source except where due acknowledgement is made. No part of this assessment has been written for me by any other person except where such collaboration has been authorised by the assessor concerned. I understand that plagiarism is the presentation of the work, idea or creation of another person as though it is your own. Plagiarism occurs when the origin of the material used is not appropriately cited. No part of this assessment is plagiarised. Student signature and Date Document titleVersion 1.0Page 1 of 1 Disclaimer:  Printed copies of this document are regarded as uncontrolled. Please check to ensure this is the latest version. © 2011 Department of Education and Communities, TAFE NSW eLearning Hub | Version: 0.0 | Created: dd/mm/2011 Document title: BSBPMG513_AE_Kn_1of2Page 1 of 8 Resource ID: TBS_18_008_ BSBPMG513_AE_Kn_1of2 STUDENT NAME: Version:1.0 Date created:17/12/2018 Date modified:21/12/2018 For queries, please contact: Technology and Business Services SkillsPoint, Ultimo © 2018 TAFE NSW, Sydney RTO Provider Number 90003 | CRICOS Provider Code: 00591E This assessment can be found in the: Learning Bank The contents in this document is copyright © TAFE NSW 2018, and should not be reproduced without the permission of the TAFE NSW. Information contained in this document is correct at time of printing 20 December 2018. For current information please refer to our website or your teacher as appropriate. Document titleVersion 1.0Page 1 of 1 Disclaimer:  Printed copies of this document are regarded as uncontrolled. Please check to ensure this is the latest version. © 2011 Department of Education and Communities, TAFE NSW eLearning Hub | Version: 0.0 | Created: dd/mm/2011 Assessment instructions Assessment details Instructions Assessment overview The objective of this assessment is to assess your knowledge and understanding in managing project quality. Assessment Event number 1 Instructions for this assessment This is a knowledge assessment and will be assessing you on your knowledge of the unit. This assessment is in two (2) parts and includes an Assessment Feedback form: 1. Knowledge questions 2. Assessment Feedback Submission instructions On completion of this assessment, you are required to upload it or hand it to your assessor for marking. Ensure you have written your name at the bottom of each page of this assessment. It is important that you keep a copy of all electronic and hardcopy assessments submitted to TAFE and complete the assessment declaration when submitting the assessment. What do I need to do to achieve a satisfactory result? To achieve a satisfactory result for this assessment all questions must be answered correctly. What do I need to provide? Pens and computer with appropriate software and internet access (if working off campus) What the assessor will provide? Computer with appropriate software and internet access (if working on campus) Due date and time allowed Refer to Unit Assessment Guide. Assessment feedback, review or appeals Appeals are addressed in accordance with Every Students Guide to Assessment. Specific task