Assignment 2: LASA 2—Manufacturing Budget Analysis Tom Emory and Jim Morris strolled back to their plant from the administrative offices of Ferguson & Son Manufacturing Company. Tom is manager of the...

1 answer below »
Assignment 2: LASA 2—Manufacturing Budget Analysis
Tom Emory and Jim Morris strolled back to their plant from the administrative offices of Ferguson & Son Manufacturing Company. Tom is manager of the machine shop in the company's factory; Jim is manager of the equipment maintenance department.
The men had just attended the monthly performance evaluation meeting for plant department heads. These meetings had been held on the third Tuesday of each month since Robert Ferguson, Jr., the president's son, had become plant manager a year earlier.
As they were walking, Tom Emory spoke: “Boy, I hate those meetings! I never know whether my department's accounting reports will show good or bad performance. I'm beginning to expect the worst. If the accountants say I saved the company a dollar, I'm called ‘Sir,’ but if I spend even a little too much—boy, do I get in trouble. I don't know if I can hold on until I retire.”
Tom had just been given the worst evaluation he had ever received in his long career with Ferguson & Son. He was the most respected of the experienced machinists in the company. He had been with the company for many years and was promoted to supervisor of the machine shop when the company expanded and moved to its present location. The president (Robert Ferguson, Sr.) had often stated that the company's success was due to the high-quality work of machinists like Tom. As supervisor, Tom stressed the importance of craftsmanship and told his workers that he wanted no sloppy work coming from his department.
When Robert Ferguson, Jr., became the plant manager, he directed that monthly performance comparisons be made between actual and budgeted costs for each department. The departmental budgets were intended to encourage the supervisors to reduce inefficiencies and to seek cost reduction opportunities. The company controller was instructed to have his staff “tighten” the budget slightly whenever a department attained its budget in a given month; this was done to reinforce the plant manager's desire to reduce costs. The young plant manager often stressed the importance of continued progress toward attaining the budget; he also made it known that he kept a file of these performance reports for future reference when he succeeded his father.
Tom Emory's conversation with Jim Morris continued as follows:

Emory:
I really don't understand. We've worked so hard to meet the budget, and the minute we do so they tighten it on us. We can't work any faster and still maintain quality. I think my men are ready to quit trying. Besides, those reports don't tell the whole story. We always seem to be interrupting the big jobs for all those small rush orders. All that setup and machine adjustment time is killing us. And quite frankly, Jim, you were no help. When our hydraulic press broke down last month, your people were nowhere to be found. We had to take it apart ourselves and got stuck with all that idle time.

Morris:
I'm sorry about that, Tom, but you know my department has had trouble making budget, too. We were running well behind at the time of that problem, and if we had spent a day on that old machine, we would never have made it up. Instead, we made the scheduled inspections of the forklift trucks because we knew we could do those in less than the budgeted time.

Emory:
Well, Jim, at least you have some options. I'm locked into what the scheduling department assigns to me and you know they're being harassed by sales for those special orders. Incidentally, why didn't your report show all the supplies you guys wasted last month when you were working in Bill's department?

Morris:
We're not out of the woods on that deal yet. We charged the maximum we could to other work and haven't even reported some of it yet.

Emory:
Well, I'm glad you have a way of getting out of the pressure. The accountants seem to know everything that's happening in my department, sometimes even before I do. I thought all that budget and accounting stuff was supposed to help, but it just gets me into trouble. It's all a big pain. I'm trying to put out quality work; they're trying to save pennies.
Review the case. Respond to the following:

  • Identify the problems that appear to exist in Ferguson & Son Manufacturing Company's budgetary control system and explain how the problems are likely to reduce the effectiveness of the system. (approximately 1 page)

  • Explain how Ferguson & Son Manufacturing Company's budgetary control system could be revised to improve its effectiveness. (approximately 1–2 pages)

  • Explain how the use of an activity-based costing system could change the results of the budget, if utilized. (approximately 1 page)

  • As stated in the case, many employees have “quit trying” and have altered behavior on the job. Provide specific ways for how you would use a budget to change employee behavior and align goals in the organization. Explain how goal alignment can improve profitability and overall return to the shareholders of the company. (approximately 1 page)

  • Synthesize data to explain the concept of ROI and describe how the use of an activity-based costing system can improve the company’s ROI and the potential impact on free cash flow. (approximately 1 page)


Write a 5–6-page report in Word format. Apply APA standards to citation of sources
Answered Same DayDec 22, 2021

Answer To: Assignment 2: LASA 2—Manufacturing Budget Analysis Tom Emory and Jim Morris strolled back to their...

David answered on Dec 22 2021
111 Votes
Introduction
Budget can be called as the exhaustive numerical strategy for the purchase and usage of
financial and other sources over a fixed future time period. The action requiring preparation of
budget is called as budgeting. Budgetary Control can be called as the use of budgets
for
controlling the activities of organization. In today’s world planning is the utmost important tool
which is needed by the organization to move ahead. The organization focuses on setting up the
goals which rests on the profitability and growth of the organization. So to achieve the goals and
targets fixed by the organization, it needs to focus on strategic planning. The management
focuses on executing and implementing strategic planning on a regular basis so as to achieve
competitive advantage in market and to fulfill the goals and targets of the organization.
Budgeting can be said to be an important tool for the management which helps in evaluating the
performance of the organization. It helps in evaluating and controlling various financial aspects
of the organization. It helps in decision making with respect to capital projects and other
financial aspects. (Orlando, 2009)
Budgeting helps in evaluating the performance of the organization and all the individual
departments. There is a strong interrelationship among the processes of policy setting by a
strategic plan, deciding for the resources needed to produce goods and services that help in
achieving the goals of the plan, monitoring operations and reporting on performance, and
evaluating performance as it is linked to the strategic plan. So through this we can say that the
budgeting is one of the tools which help in analyzing and monitoring the performance of the
organization. (Hilton, 2006)
The given case also revolves around the budgetary problems and its implications in an
organization.
Problems in Ferguson & Son Manufacturing Company’s Budgetary Control System
Budgetary control system is considered as one of the important instrument for planning and
control. The success of the organization is dependent on how effective planning is. Process of
budgeting involves comparison between budgeted figures and actual figure. It appears that the
comparison between fixed budgeted figures and actual budget is made without flexing it.
Therefore, this results in a problem with employee of the company. It appears that the
concentration is on the dollar amount not on the volume of the goods manufactured. For
example, the manufacturing target of the company is 2,000 units with fixed cost of $20,000 and
variable cost of $60,000. It implies that the total budgeted cost is $80,000. Now, it will be
compared with the actual figures without observing the volume. Presuming that the actual cost
spent is $90,000 and the volume is 2500 units. If...
SOLUTION.PDF

Answer To This Question Is Available To Download

Related Questions & Answers

More Questions »

Submit New Assignment

Copy and Paste Your Assignment Here