1. You are the administrator for a small network made up of two routers. What is a quick method you can use to configure routing between all networks? (A) Build static routes to all unknown routes on...

1. You are the administrator for a small network made up of two routers. What is a quick method you can use to configure routing between all networks? (A) Build static routes to all unknown routes on each router. (B) Configure the GWLR on both routers to point to one another. (C) Configure NAT overload on the first router and Static NAT on the second router. (D) Configure access lists to allow traffic to route between the networks.

2. Your routers are running the RIP routing protocol and you type the following command. What is the outcome of typing this command? Ip route 0.0.0.0 0.0.0.0 55.12.4.38 (A) If there is no matching destination network in the routing table, the router will send the packet to 55.12.4.38. (B) You have configured RIP to broadcast knowledge of the 55.12.4.38 network. (C) You have configured a connected route to forward traffic to 55.12.4.38. (D) You have configured Gateway of Last Resort so that if there is a packet destined for the 55.0.0.0 network, then the router will forward it on to 0.0.0.0.96