1. Build the Network and Configure Basic Device Settings2. Configure SNMP Manager and Agents PC-PT T105 consider as SNMP-ManagerOther devices which are necessary for monitor consider as...

1. Build the Network and Configure Basic Device Settings 2. Configure SNMP Manager and Agents PC-PT T105 consider as SNMP-Manager Other devices which are necessary for monitor consider as SNMP-Agents (routers and switch) Routers, the SNMP community string is ciscoRouter, with read-only privileges. Switches, the SNMP community string is ciscoSwitches, with write-read-only privileges 3. Discover SNMP agents. Discover which interfaces are up and which are down (Record the OID code numbers and their corresponding message translations) 4. Change SNMP agents configuration Change the name of switch S105 to bridge Change the switch S104 interface mode from up to down Which information could not gather? Define a SNMP community string is ciscoR, with write-read-only privileges in the R105 Change the slot1 mode to down Which information could not gather? Useful information about configuration can be find in the Catalyst 3750-X and 3560-X Switch Software Configuration Guide (chapter 35): https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3750x_3560x/software/rel ease/12-2_55_se/configuration/guide/3750xscg/swsnmp.pdf